No products in the cart.
-
Description Fermentation System – Support for Condensate Separator PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-ChannelFermentation System – Support for Condensate Separator – Available On Request, Prices in Dollars
₦115.56 -
Description Fermentation System – Tube Distribution Rack for MilliGascounters on top panel of heating oven FD115 PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Tube Distribution Rack for MilliGascounters on top panel of heating oven FD115 – Available On Request, Prices in Dollars
₦416.16 -
Description Fermentation System – Tube Distribution Rack for MilliGascounters on top panel of heating oven FD56 PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Tube Distribution Rack for MilliGascounters on top panel of heating oven FD56 – Available On Request, Prices in Dollars
₦367.20 -
Description Fermentation System – Tubing connection from fermentation pot to MilliGascounter PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Tubing connection from fermentation pot to MilliGascounter – Available On Request, Prices in Dollars
₦35.04 -
Description Fermentetion System – Back Pressure Valve (Set) PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentetion System – Back Pressure Valve (Set) – Available On Request, Prices in Dollars
₦62.40 -
-
Description FETAL MONITOR Model: PDJ-800G Manufacturer: PERLONG MEDICAL EQUIPMENT FEATURES OF FETAL MONITOR Single or twins ultrasound transducer Compact and portable design, table placement or wall mounted 8.4″ color LCD screen display (up to 60° rotation) Clearly displays patient data and waveform Able to manually record fetal movement High and low fetal heart rate alarm function Continuous 24-hour real-time monitoring function Continuous 12-hour patient waveform and data storage with playback ability Equipped with picture freeze function Selectable English & Chinese interface for operation OTHER FEATURES OF FETAL MONITOR Single, Twins monitoring selectable 9 chip pulse width beam probe Extra-long life, high-resolution built-in thermal printer able to output waveform, text, and other information Built-in RJ45 Ethernet interface, can be connected with central monitoring system Ultrasound probe nominal frequency: 1.0MHz FHR Range: 65BPM~210BPM; Accuracy: ±2% AC Power Supply Voltage: AC100V~ 240V Working Frequency: 50Hz/60Hz TOCO Range: 0~100%; Resolution: 1% Fetal Marking: Manual push button (Can operated by pregnant mother) Optional: Twins monitoring ultrasound probe FHR2FETAL MONITOR PDJ-800G – Available On Request, Prices in Dollars
₦1,001.31 -
Description PRODUCT DESCRIPTION Field Calibration Unit (F6080) Properly calibrate your power system simulator with the F6080 Field Calibration Module, which helps save time and money by giving you the capability to calibrate your test system in the field. The F6080 provides automatic recalibrations of voltage and current sources for all ranges. It also checks and calibrates logic inputs and outputs. Protection Suite Software is used to test the calibration. The use of a 10 kHz filter is recommended for frequency measurements; this filter can be ordered from Doble.Field Calibration Unit (F6080) – Available On Request, Prices in Dollars
₦0.00 -
Description PRODUCT DESCRIPTION Field Probe Rod Standard insulated hot stick, 3 x 1 m (total length 3 meters) Accessory for PDField Probe Rod – Available On Request, Prices in Dollars
₦0.00 -
Description PRODUCT DESCRIPTION Field Soft Carry Case for DUC and Reggedized Keyboard ACCESSORY FOR: Universal Controller,DUC C6 Model Storm Case ,DUC C6 Model STORM CASE, DUC C6 MODEL W/CUSTOM FOAM FOR USE WITH OPTIONAL FIELD CARRY CASE AND KICKSTAND
Field Soft Carry Case for DUC and Reggedized Keyboard – Available On Request, Prices in Dollars
₦0.00 -
Description Lightweight, fully adjustable tripod with carrying case At only 2½ lbs, this tripod is lightweight – yet strong and stable. Flip lever legs quickly lock into place at any height up to 58” and quickly fold down to 21” for carrying and storage. The tripod’s height can be further adjusted with a geared, cranked elevator column. Features a 3-way adjustable head, self-leveling swivel feet, a bubble-level, carrying handle and an accessory hook. Comes in a zippered carrying case with a handle.Field Tripod – Available On Request, Prices in Dollars
₦118.15 -
-
Description Film Applicator with 2 Gaps, bar-shaped Double Bar 2″, 2&4 mils Double Gap Drawdown Bar Gap Clearance: 2 & 4 mils Film Width: 2 in Features The double bar film applicator has two gap clearances. Large selection of film widths Stainless steel construction for long lifeFilm Applicator with 2 Gaps, bar-shaped – Available On Request, Prices in Dollars
₦421.43 -
Description 4-Sided Bar 60, 30-120 µm Features The 4-sided applicator is a versatile bar applicator with multiple gap clearances. For low viscosity coatings, the applicator frame is the ideal choice. Made of high quality stainless steel for long life Available in film widths from 60 to 80 mm Easy to clean surfaceFilm Applicator with 4 Gaps, bar-shaped – Available On Request, Prices in Dollars
₦777.87 -
Description Applicator Frame 60, 30-120 µm Features The 4-sided applicator is a versatile bar applicator with multiple gap clearances. For low viscosity coatings, the applicator frame is the ideal choice. 4 gap clearances in one frame Useful for non-rigid substrates Packaged in a reusable box to prevent damageFilm Applicator with 4 Gaps, frame-style – Available On Request, Prices in Dollars
₦777.87