Sort by:
929–944 of 2369 Results
-
Spring loaded, high strength alloy jaws holds objects in place Holds objects up to 7/8" Width/Diameter Powder coated for long lasting finishSku: CH0258B
Eisco Labs Burette/Tube Clamp, Double, High Strength Alloy – Spring Loaded Jaws – 7/8″ Width Capacity, Max 16mm Dia. Rod
₦1,000.00 -
Spring loaded, high strength alloy jaws holds objects in place Holds objects up to 7/8" Width/Diameter Powder coated for long lasting finishSku: CH0258A
Eisco Labs Burette/Tube Clamp, Single, High Strength Alloy – Spring Loaded Jaws – 7/8″ Width Capacity, Max 16mm Dia. Rod
₦1,000.00 -
Chromatography is a method used by scientists for separating organic and inorganic compounds so that they can be analyzed and studied Sheets are 25cm x 25cm ( 9.84" x 9.84" ) Pack of 100Sku: CH0395C
Eisco Labs Chromatography Filter Paper Sheet 25cm x 25cm (9.84″ x 9.84″) Pack of 100
₦1,000.00 -
Eisco labs Closed Ring Clamp ID 2.5" with Boss head clamp - 5" Long Cast Iron Ring Clamp with 5/16" diameter stem Open boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from boss head to ring is approx. 1.5" Inside Diameter of ring 2.5" Clamp from Boss head center line measures 5" to edge of closed ring.Sku: CH0674B
Eisco labs Closed Ring Clamp ID 2.5″ with Boss head clamp – 5″ Long
₦1,000.00 -
Size # 1 Cork Stopper bottom 8mm, top 11mm, length 16mm Corks may vary in size - Sizes are generally close Pack of 10Sku: CH0310D
Eisco Labs Cork Stopper – Bark, size no. 1, bottom 8mm, top 11mm, length 16mm, pk of 10
₦1,000.00 -
Size # 7 Cork Stopper bottom 15mm, top 21mm, length 25mm Corks may vary in size - Sizes are generally close Pack of 10Sku: CH0310J
Eisco Labs Cork Stopper – Bark, size no. 7, bottom 15mm, top 21mm, length 25mm, pk of 10
₦1,000.00 -
Wide range temperature, from -50°C to +300°C (-58°F to +572°F) External probe on 36 inch cord, with cord storage inside unit Requires 1 AAA Battery (included)Sku: PH0251
Eisco Labs Digital Thermometer, Wide Range, -50°C to +300°C, Handheld with Probe
₦1,000.00 -
Eisco Labs Drop-Forged Steel G-Clamp 150mm Drop-forged steel clamp capable of opening 150mm (approximately 6") Threaded steel screw with swivel pads grips material more tightly Sliding T-bar handle allows for easy tightening and untightening Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torque Great in the shop or in the labSku: CH0938E
Eisco Labs Drop-Forged Steel G-Clamp, 150mm
₦1,000.00 -
Economy Dynamometer Plastic bodySku: PH0036D
Eisco Labs Economy Dynamometer – Spring Balance, High Resolution, 10N
₦1,000.00 -
Economy Dynamometer Plastic bodySku: PH0036B
Eisco Labs Economy Dynamometer – Spring Balance, High Resolution, 2.5N
₦1,000.00 -
Eisco Labs Economy Dynamometer - Spring Balance High Resolution 20N Economy Dynamometer Plastic bodySku: PH0036E
Eisco Labs Economy Dynamometer – Spring Balance, High Resolution, 20N
₦1,000.00 -
Economy Dynamometer Plastic bodySku: PH0036G
Eisco Labs Economy Dynamometer – Spring Balance, High Resolution, 5000g/50N
₦1,000.00 -
Regulated DC Power supply Provides three different ranges - 0-50 V, 0-100V and 0-125 V at 300 mA capacity. Output voltage is selected with the help of Band-switch. On/off 6 total DC output terminals - 3 positive 3 negativeSku: PH1339
Eisco Labs Electrophoresis Power Supply DC 0-125 V 500ma
₦1,000.00 -
Eisco Labs Evaporating Basin - Porcelain - Flat Form with Spout - 200ml Glazed for easy cleaning 4.9" diameter, 1.6" depth Spout for easy pouring 200 ml capacitySku: CH0070D
Eisco Labs Evaporating Basin – Porcelain – Flat Form with Spout – 200ml
₦1,000.00 -
Eisco Labs Hand Crank Centrifuge 4 Tube Capacity (15ml tubes) Table Clamp, Hand Crank, Centrifuge with 4 buckets 4 tubes of 15 ml maximum capacity Gear box contains grease and fittings for maintenance. Adjustment to crank and gearing will be needed once installed on table top to ensure easy use.Sku: CH0266B
Eisco Labs Hand Crank Centrifuge, 4 Tube Capacity (15ml tubes)
₦1,000.00 -
Eisco Labs Heavy Duty Boss Head Black Coated Fits Rods up to 20mm Diameter Heavy duty boss head Die casted alloy with black coat finish Accepts rods measuring up to 20mm in diameter Large thumb screws and grooved knobs for easy adjustmentsSku: CH0665B
Eisco Labs Heavy Duty Boss Head, Black Coated, Fits Rods up to 20mm Diameter
₦1,000.00
















