No products in the cart.
-
Product Overview?64104 Bile Salts AgarConcentration 43.00 gm/lit. Part D Storage : 8 to 25?C (Cool & dry area) HSN Code : 38210000 IMDG Identification :Not Regulated for Transport (Non-Haz)Packaging:? 500?gProduct More SpecificationsMade InIndiaThere are no reviews for this product.Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below ContinueBile Salts Agar, 500 G
₦100.00 -
BILIRUBIN (TOTAL AND DIRECT) PRINCIPLE TOTAL and DIRECT Colorimetric method END POINT Bilirubin is converted to coloured azobilirubin by diazotized sulfanilic acid and is measured photometrically. Of the two bilirubin fractions in serum ?bilirubin-glucuronide and free bilirubin which is bound to albumin? only the former reacts directly, while free albumin reacts after being displaced from protein by an accelerator. The difference of two measurements total bilirubin (with accelerator) and direct bilirubin (without accelerator) enables the calculation of indirect bilirubin. The terms ?direct? and ?indirect? bilirubin refers exclusively to the reaction characteristics in the presence or absence of an accelerator or solubilizer and are only approximate equivalents of the two bilirubin fractions. REAGENT COMPOSITION 2 x 100 ml RT Sulfanilic acid 29 mmol/L, hydrochloric acid 0.24 mol/L, Duposol? 3% (w/v). 2 x 80 ml. RD Sulfanilic acid 29 mmol/L, hydrochloric acid 0.24 mol/L. RN Sodium nitrite 11.6 mmol/L. 1 x 20 ml. Ancillary kit: CAL Bilirubin Calibrator. REF. 1912005 Bilirubin freeze-dried into a protein matrix. Concentration value is traceable to Standard Reference Material 916a. The concentration of total T and direct D Bilirubin is stated on the label and is lot-specific. The target values are derived using LINEAR reagents on the Cobas Mira. STORAGE AND STABILITY Store at 2-30?C. REAGENT PREPARATION Working reagents. Mix 1 mL RN + 4 mL RT (Total) or 1 mL RN + 4 mL RD (Direct). Stable for 8 days at 2-8?C. Calibrator. Reconstitute the vial by adding exactly 1.0 mL of distilled water. Mix carefully and let stand for 5-10 minutes before use. The stability of bilirubin in the dark is: 8 hours 16-25?C, 2 days 2-8?C and 28 days ?20?C frozen once. SAMPLES Fresh hemolysis-free serum. Store in the dark until use. Samples can be frozen at ?15?C or below in which case bilirubin is stable for 2 months. MATERIALS REQUIRED Photometer or colorimeter capable of measuring absorbance at 540 ? 20 nm. Constant temperature incubator set at 37?C. Use the same temperature for assay of calibrator, controls and samples. Pipettes to measure reagent and samples. BILIRUBIN (TOTAL AND DIRECT) Reagents per boxBILIRUBIN (TOTAL AND DIRECT)
₦660.00 -
Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below ContinueBilirubin Auto Direct FS
₦1,086.00 -
Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below Continue
Bilirubin Auto Direct FS.
₦20,814.00 -
There are no reviews for this product.Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below Continue
Bilirubin Auto Total FS
₦6,777.00 -
There are no reviews for this product.Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below Continue
Bilirubin Auto Total FS.
₦14,391.00 -
Sale
Product Overview?Bilirubin Conjugate ditaurate disodiumCAS No:?? ?68683-34-1 Synonyms:?? ?Bilirubin conjugate ditaurate disodium; Bilirubin conjugate; Disodium 2,2'-[(1,10,19,22,23,24-hexahydro-3,7,13,18-tetramethyl-1,19-d Product Code:?? ?XB177640 MDL No:?? ?MFCD00044931 Chemical Formula:?? ?C37H46N6O10S2?2Na Molecular Weight:?? ?844.91 g/molPackage Size; 1 GProduct More SpecificationsMade InUKWrite a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below ContinueBilirubin Conjugate Ditaurate disodium 1 G
Original price was: ₦35,075.00.₦3,050.00Current price is: ₦3,050.00. -
ichem100 system pack reagent for in vitro determination of Bilirubin Direct in serum or plasma in BioChemistry Systems. Clinical significance Bilirubin is a waste product derived from the heme moeity of the hemoglobin released from senescent or damaged erythrocytes. Total bilirubin is the sum of the unconjugated and conjugated fractions.Reagent Composition: Diazotized Sulfanilic Method Final Concentration of reactive ingredients: Bilirubin Direct reagent-1Product More SpecificationsMade InUSAWrite a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below ContinueBilirubin Direct i-Chem,4×60 Tests
₦390.00 -
ichem100 system pack reagent for in vitro determination of Bilirubin Total in serum or plasma in BioChemistry Systems. Clinical significance Bilirubin is a waste product derived from the heme moeity of the hemoglobin released from senescent or damaged erythrocytes. Total bilirubin is the sum of the unconjugated and conjugated fractions.Product More SpecificationsMade InUSAThere are no reviews for this product.Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below Continue
Bilirubin Total i-Chem,4×60 Tests
₦390.00 -
Sale
Neon is probably the best workplace chair for ESD areas. All the plastic and metal parts in ESD Neon are black. The reason for this is because they are conductive, as is every component in the Neon. Plastic too is coated with carbon particles to make it conductive. The most striking feature of ESD Neon is its flex strip. It is made of soft plastic and protects the chair and its environment. There is a choice of three colours for the flex strip. The chair itself consists of solid steel with an aluminium base. Neon is available with a choice of castors with load-sensitive brakes for hard floors, or with abrasion-resistant glides. In addition, for the high version optional Stop&Go castors are available. All glides and castors are volume conductive. Feefo Reviews Related Blogs Bimos Chairs Bimos are specialists in chairs for laboratories and industrial workplaces. The chairs are customisable and adaptable to suit your needs. This blog will provide you with information on their upholstery and industry options to help you decide which is best for you. Bimos Neon 3 chair with footrest and glides Upholstery options There are four upholstery options, depending on your prefer...1 year ago Anti-static ESD chairs for the Lab and Workplace ESD or "Electro Static Discharge" is the electrostatic discharge of charged objects or persons. Having ESD protection involves the protection of extremely sensitive components such as microelectronic components during their production, further processing and delivery. The energy created by static discharge in a semiconductor can be compared to lighting striking a tree - therefore electrostatic ...6 years ago Seat Materials Bimos Upholstery Selection Guide:? ? Integral Foam Magic Synthetic Leather Duotec Fabric Supertec ? Features Extremely tough and durable Washable Capable of withstanding mechanical (cut) damage Resistant to flying sparks Resistant to mild acids and alkalines Washable Low-maintenance Impervious to oils and disinfecting agents Soft and comfortable Breathable Comfortable Soft Hard-wearing Soft and comfortable Breathable Very Robust Cut resistant Non slip Easy to clean Ideal for wet labs? ? ? ? ? Ideal for dry labs / production / admin ? ? ? ? ?Bimos 9560E – ESD Neon 1 Anti Static Lab chair without seat pads
Original price was: ₦317,770.00.₦264,810.00Current price is: ₦264,810.00. -
Sale
Bimos Cleanroom Basic 3 Lab Chair Range? The Bimos cleanroom basic is an all round chair ideal for use in cleanroom environments as well as within ESD environments. An ergonomic design with a number of seat mechanism types. Features: Choose from three back rest mechanisms - Permanent contact (with 430mm backrest height) Permanent contact with seat inclination (with 530mm backrest height) Synchronous with weight regulation (with 530mm backrest height) Seat height adjustable from 620-870mm for models with a permanent contact type back rest, 630-890mm for model with seat inclination or 660-910mm for models with a synchronous back rest. Back rest height is user adjustable 5 star abrasion resistant die cast aluminium base Supplied with glides and a footring Suitable for use in cleanrooms and ESD environments complying with the following standards: Air cleanliness classification 3 pursuant to DIN EN ISO 14644-1 Air cleanliness classification 1 pursuant to US Fed. St. 209 E Provisions of the EU GMP guidelines Electrostatic discharge measures pursuant to EN 61340-5-1 The synthetic leather, upholstery and upholstery support are permanently bonded using special foam technology to ensure that no particles can be emitted. The smooth, sealed surfaces of the seat and backrest shells prevent swirl even when there is a constant flow of air through the filter system and stop the build-up of particles on the chair. The seat material is made from conductive synthetic leather with ESD and cleanroom compliant properties. It is also non-tear and non slip to ensure a firm grip even when the user is wearing smooth cleanroom clothing. Options: Optional foot ring Optional arm rests - choose from ring shaped or multifunctional arm rests. Also available in the cleanroom basic range is the shorter Cleanroom Basic 2 supplied with castors Options to have stop and go castors This chair is supplied flat packed but can be shipping assembled for an additional cost, please contact us for pricing. Warranty: 10 year manufacturers warranty Feefo Reviews Related Blogs Bimos Chairs Bimos are specialists in chairs for laboratories and industrial workplaces. The chairs are customisable and adaptable to suit your needs. This blog will provide you with information on their upholstery and industry options to help you decide which is best for you. Bimos Neon 3 chair with footrest and glides Upholstery options There are four upholstery options, depending on your prefer...1 year ago More Information More Information ColourBlackBimos Cleanroom Basic 3 Black synthetic leather chair
Original price was: ₦359,730.00.₦299,775.00Current price is: ₦299,775.00. -
Bimos Cleanroom Plus - Cleanroom suitable laboratory chairs Available with short or tall back on castors or tall back on glides with footrest. The Bimos Cleanroom Plus range of lab chairs have synthetic leather coverings and?are designed specifically for cleanroom use to ensure no particles are emitted. Features Choice of two heights of chair 440-565mm (Cleanroom plus 2) or 630 - 890mm (cleanroom plus 3) Permanent contact backrest The cleanroom plus 2 comes with the option of a short (380mm) or tall backrest (500mm).? The Cleanroom plus 3 comes a 380mm high backrest 5 star polished aluminium base Dust protected gas spring Non-slip artifical leather seat upholstery will ensures grip even with smooth clean room clothing. Air cleanliness classification 3 according to DIN EN ISO 14664-1. Air purity level 1 conform to US Fed. Std. 209E The smooth, sealed surfaces of the seat and backrest shells prevent swirl even when there is a constant flow of air through the filter system and stop the build-up of particles on the chair. The synthetic leather, upholstery and upholstery support are permanently bonded using special foam technology to ensure that no particles can be emitted. The sealed design of the seat and backrest cover means that all the moving parts of the chair?s mechanical system are enclosed so that particles cannot escape. The plus range features a conductive sheet steel backrest and these chairs exceed the requirements of ESD (Electrostatic discharge) protection according to DIN EN 61340-5-1. All Cleanroom Plus chairs feature ESD glides or castors. Options Additional options includes arms rests. Please see each chair individually for other applicable options.? Each chair is supplied flat packed, but can be shipped assembled for an extra cost.? Warranty 10 year manufacturers warranty Feefo Reviews Related Blogs Bimos Chairs Bimos are specialists in chairs for laboratories and industrial workplaces. The chairs are customisable and adaptable to suit your needs. This blog will provide you with information on their upholstery and industry options to help you decide which is best for you. Bimos Neon 3 chair with footrest and glides Upholstery options There are four upholstery options, depending on your prefer...1 year ago Maintaining Laboratory Chair Hygiene Important material features for laboratory hygiene Hygiene standards in laboratories must be uncompromising at all times. From pharmaceuticals and chemistry, to biotechnology and healthcare this applies in all laboratories. Even the smallest of impurities can influence test results, falsify or even destroy them. A wide variety of disinfectants are used to kill off the microorganisms in the lab...6 years ago Product Attachments Bimos Cleanroom plus brochure (395.38 kB) Bimos Certified Dealer Certificate (201.71 kB) More Information More Information ColourBlackBimos Cleanroom Plus synthetic leather laboratory chair
₦50,000.00 -
Labster is the world's first pure laboratory chair, and can even be used in cleanroom conditions.The ergonomically shaped comfort upholstery of Labster chairs is available in soft Skai synthetic leather or sturdy integral foam. Both surfaces are easy care and resistant to disinfectants.All models have a platinum grey frame with an easy clean base underneath.Choose from glides (in abrasion resistant plastic with a large surface area and flat design to prevent trips) or castors (dual-wheel safety castors with load-sensitive brakes. Soft castors for hard floors are fitted as standard, please request if you require hard castors for soft floors).Compact design with space-saving star base makes it suitable for use even in small spaces.Design complies with GMP guidelines and meets the requirements of S1, S2 and S3 (safety class) biotechnology labs. Compliant with air cleanliness class 3 in accordance with EN ISO 14644-1Other colours are available on request; synthetic leather type available in black, blue, grey, red, mint green and white. Integral foam type available in black and grey.Choice of high or low chairs for ESD use. Conductive chair design meets ISO 61340-5-1 to prevent electrostatic discharge Feefo Reviews Related Blogs Bimos Chairs Bimos are specialists in chairs for laboratories and industrial workplaces. The chairs are customisable and adaptable to suit your needs. This blog will provide you with information on their upholstery and industry options to help you decide which is best for you. Bimos Neon 3 chair with footrest and glides Upholstery options There are four upholstery options, depending on your prefer...1 year ago Anti-static ESD chairs for the Lab and Workplace ESD or "Electro Static Discharge" is the electrostatic discharge of charged objects or persons. Having ESD protection involves the protection of extremely sensitive components such as microelectronic components during their production, further processing and delivery. The energy created by static discharge in a semiconductor can be compared to lighting striking a tree - therefore electrostatic ...6 years ago Product Attachments Bimos Certified Dealer Certificate (201.71 kB) Bimos ESD Labster Brochure (2.94 MB) Seat Materials Bimos Upholstery Selection Guide:? ? Integral Foam Synthetic Leather ? Features Extremely tough and durable Washable Capable of withstanding mechanical (cut) damage Resistant to flying sparks Resistant to mild acids and alkalines Washable Low-maintenance Impervious to oils and disinfecting agents Soft and comfortable Ideal for wet labs? ? ? Ideal for dry labs / production / admin ? ? ?Bimos ESD Labster chairs
₦50,000.00