Key features

Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals

Offers true-RMS AC voltage and current for measuring non-linear signals

Captures intermittents as short as 250 µS

Safety rated CAT III 1000 V, CAT IV 600 V

Includes a built-in thermometer and temperature probe

Product overview: Fluke 87V Industrial Multimeter

Fluke 87V identifies complex signal problems fast
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS.
Use the 87V to measure AC current up to 10 A directly, or use an optional clamp for high current measurements, frequency to 200 kHz, plus % duty cycle, resistance, continuity and diode test. And it includes a built-in thermometer so you can take temperature readings without having to carry a separate instrument, and more. Plus, with its bright, two-level backlit display you’ll be able to see the results better in dim light.
Correctly measure pulse-width modulated motor drive signals
The Fluke 87V takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high-frequency, high-energy noise generated by large drive systems.
Electrical safety
All the inputs in the 87V are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8000 V.
Other useful features:

Easy access door for fast battery changes without breaking the calibration seal

Removable holster with built in test lead and probe storage for convenience

Audible Input Alert warning against wrong use of input jacks

Provides peak capture and Min/Max/Avg recording to capture intermittents as short as 250 µS

Designed and built in the U.S.

Comes with a lifetime warranty

Features—6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution

Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks

Includes an analog bargraph for fast changing or unstable signals

Presents a large digit display with bright, two-level backlight for easier reading in low light

Delivers 0.05% DC accuracy

Measures up to 1000 VAC and DC

Provides 10,000 µF capacitance range for components and motor caps

Offers relative mode to remove test lead interference from low ohms measurements

Features auto and manual ranging for maximum flexibility

Includes Touch Hold to capture stable readings of noisy signals

Specifications: Fluke 87V Industrial Multimeter

Specifications

Voltage DC

Maximum voltage

1000 V

Accuracy

±(0.05% + 1)

Maximum resolution

10 µV

Voltage AC

Maximum voltage

1000 V

Accuracy

±(0.7% + 2) True RMS

AC bandwidth

20 kHz with low pass filter; 3 dB @ 1 kHz

Maximum resolution

0.1 mV

Current DC

Maximum amps

10 A (20 A for 30 seconds maximum)

Amps accuracy

±(0.2% + 2)

Maximum resolution

0.01 µA

Current AC

Maximum amps

10 A (20 A for 30 seconds maximum)

Amps accuracy

±(1.0% + 2) True RMS

Maximum resolution

0.1 µA

Resistance

Maximum resistance

50 MΩ

Accuracy

±(0.2% + 1)

Maximum resolution

0.1 Ω

Capacitance

Maximum capacitance

9,999 µF

accuracy

±(1% + 2)

Maximum resolution

0.01 nF

Frequency

Maximum frequency

200 kHz

Accuracy

±(0.005% + 1)

Maximum resolution

0.01 Hz

Duty cycle

Maximum duty cycle

99.9%

Accuracy

±(0.2% per kHz + 0.1%)

Maximum resolution

0.1%

Temperature measurement

–200.0 °C – 1090 °C
–328.0 °F – 1994.0 °F
excluding probe

80 BK temperature probe

–40.0 °C – 260 °C
–40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater

Conductance

Maximum conductance

60.00 nS

Accuracy

±(1.0% + 10)

Maximum resolution

0.01 nS

Diode

Range

3 V

Resolution

1 mV

Accuracy

±(2% + 1)

Duty cycle range

Accuracy

Within ±(0.2% per kHz + 0.1%)

Environmental Specifications

Operating temperature

–20 °C to + 55 °C

Storage temperature

–40 °C to + 60 °C

Humidity (without condensation)

0% – 90% (0 °C – 35 °C)
0% – 70% (35 °C – 55 °C)

Operating Altitude

2000 m

Safety Specifications

Overvoltage category

EN 61010–1 to 1000 V CAT III, 600V CAT IV

Agency approvals

CE, CSA, RCM

Mechanical and General Specifications

Size

201 x 98 x 52 mm (with holster)

Weight

355 g
624 g – with holster

Display

Digital

6000 counts updates 4/sec.
19,999 counts in high–resolution mode

Analog

32 segments, updates 40/sec

Frequency

19,999 counts, updates 3/sec at > 10 Hz

Warranty

Lifetime

Battery Life

Alkaline

~400 hours typical, without backlight

Shock

1 Meter drop per IEC 61010–1:2001

Vibration

Per MIL–PRF–28800 for a Class 2 instrument

Reference Specific ReferencesCondition New product Andrew U03/20/2020Fluke 87V Industrial Multimeterindustrial multimeterWrite your reviewFluke 87V Industrial MultimeterQuality12345Delivery12345Communication12345Pricing12345Title for your review*Your review*Required fields* Send or Cancel