Fluke 718 Pressure Calibrator

Key features

Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device

Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field

Error % calculation for quicker pass/fail decision making in the field

Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage

Min/Max/Hold to capture changing measurements

Switch test feature for quicker and more accurate pressure switch testing

New 1 and 300 psi pressure ranges mean fewer extra tools required

1, 30, 100 & 300 psi ranges now available

Product overview: Fluke 718 Pressure Calibrator

The complete solution to pressure calibration
The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
Specifications: Fluke 718 Pressure Calibrator

Technical Specifications

Fluke 718 Series

Measure pressure

(Internal sensor)

Accuracy

0.025% full scale

Functions

Zero, min/max, hold, damp

Dry air, non-corrosives only

Fluke 718 1G

Range

-1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)

Resolution

0.0001 psi, 0.001 mbar, 0.0001 kPa

Over pressure

5x Full Scale

Functions

Zero, Min, Max, Hold, Damp

Fluke 718 30G

Range

-12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)

Resolution

0.001 psi, 0.1 mbar, 0.01 kPa

Over pressure

5x Full Scale

Functions

Zero, Min, Max, Hold, Damp

Fluke 718 100G

Range

-12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)

Resolution

0.01 psi, 0.1 mbar, 0.01 kPa

Over pressure

2x Full Scale

Functions

Zero, Min, Max, Hold, Damp

Fluke 718 300G

Range

-12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa)

Resolution

0.01 psi, 1 mbar, 0.1 kPa

Over pressure

375 psi 25 bar

Functions

Zero, Min, Max, Hold, Damp

Fluke 718 series via 700 Series Pressure Modules

Range

29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs

Resolution

Per pressure module specs

Accuracy

To 0.025% of full span, per pressure module specs

Functions

Zero, Min, Max, Hold, Damp

Media compatibility per pressure module specs

Fluke 718 Series Via Built in Pump

Range

-12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm

Loop power range

24 V DC

Accuracy

±10%

Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V

mA Measure

Range

0 mA to 24 mA

Resolution

0.001 mA

Accuracy

0.015% + 1 count

General Specifications

Maximum voltage

30 volts (non-operating)

Temperature

-40°C to 60°C

Operating temperature

-10°C to 55°C

Relative humidity

95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)

Operating altitude

3,000 M max

Shock

1 M drop test

Vibration

Random, 2 g, 5 Hz – 500 Hz

Safety

CSA C22.2 No. 1010.1: 1992

EMC

EN50082-1: 1992 and EN55022: 1994 Class B

Size

216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in)

Weight

992 g (35 oz)

Power, battery life

9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718

Battery life

4 to 20 hours typical, depending on functions used

Warranty

Three years (one year on pressure pump in Fluke 718)

Display

LCD, 5 digit pressure and current simultaneous

For use with non-corrosive gasses

Reference Specific ReferencesCondition New product Ezubelu A07/15/2021Great product A good recommendation for everyone. Write your reviewFluke 718 Pressure CalibratorQuality12345Delivery12345Communication12345Pricing12345Title for your review*Your review*Required fields* Send or Cancel