FULLTEST3 Multifunction Tester for safety of machinery IEC/EN60204-1:2016 and low voltage switchgears and controlgears IEC/EN61439-1-2:2011 – Available On Request, Prices in Dollars

Description

FULLTEST3 Multifunction Tester for safety of machinery IEC/EN60204-1:2016 and low voltage switchgears and controlgears IEC/EN61439-1-2:2011
Multifunction Tester for safety of machinery IEC/EN60204-1:2016 and low voltage switchgears and controlgears IEC/EN61439-1-2:2011

IEC/EN60204-1:2016 Measuments:
Power Frequency Dielectric withstand voltage with test voltage of 1000VAC

Testing protection against indirect contact:

Continuity of protective conductors with test current 200mA
Automatic disconnection of the supply (RCD, MCB, Fuse)​
RCD tripping (RCD AC, A, B) up to 1A on TT Systems
Magneto-thermal protections (MCB curve verificaiton on B, C, D, K) and fuses (gG, aM) on TN Systems

​Insulation resistance measurement with test voltage of 500VDC

Discharging of residual voltage V<60V in 5sec/1sec   IEC/EN61439-1-2:2011 Measurements: Clearances and Creepage distances: Dielectric withstand voltage with test voltage of up to 3400/5100VAC Continuity of earth system and protective conductors ≥10A Power Frequency Dielectric withstand voltage with test voltage of 1800VAC Alternative power-frequency voltage test up to 5100VAC Test on enclosures of insulating material: ​Dielectric Withstand voltage with test voltage up to 2835V Discharging of residual voltage V<60V in 5sec/1sec HT Instruments offers a cutting-edge device to carry out all measurements required by the new laws as regards tests to be performed on electric switchboards and machines IEC/EN60204-1:2016 and IEC/EN61439–2:2011. Further to measurements of protective conductors’ continuity, insulation and dielectric strength, FULLTEST3 is capable of carrying out tests on RCDs type A, AC and B, General, Selective and Delayed, measurements of Line/Loop impedance also with high resolution 0.1mΩ (with optional accessory IMP57), measurement of non-trip earth resistance and leakage current with clamp transducer. It can also carry out test on breaking capacity, protection tripping, I2t tests relevant to magneto-thermal circuit breakers in curve B, C, D, K and fuses type gG and aM. The device is also provided with a “touch-screen” colour display and 3 USB ports for connection to PC, USB pen drive, USB printers and possible bar code readers. Functions of FULLTEST3 Multifunction Tester for safety of machinery IEC/EN60204-1:2016 and low voltage switchgears and controlgears IEC/EN61439-1-2:2011 Continuity of protective circuit with 200mA Continuity of protective circuit with I>10A, V<12V Continuity of protective circuit with I>25A, V<12V Insulation with test voltages 100, 250, 500, 1000VDC Dielectric strength with voltage programmable from 250V to 5100VAC Discharge time/residual voltage on plugs and internal circuits Absorbed/leaked current and power at plug of machines Tripping time/current of type A, AC, B General and Selective RCDs up to 1000mA Contact voltage Line/Loop impedance and Ipsc calculation Line/Loop impedance with high resolution (with optional accessory IMP57) Non-trip earth resistance Leakage current (with optional accessory HT96U) Phase sequence Timer and limit thresholds selectable through programmable ramps USB interface Collegamento ad accessori opzionali Provided PC interface with software for Windows