FLOW METERS INSERTION-VERSION. VA 500 – Flow meter for compressed air and gases – Available On Request, Prices in Dollars

Description FLOW METERS INSERTION-VERSION. VA 500 – Flow meter for compressed air and gases VA 500 Special features: • Including temperature measurement • RS 485 interface, Modbus-RTU as standard • Integrated display for m³/h and m³ • Applicable from 1/2” to DN 1000 • Easy installation under pressure • 4…20 mA analogue output for m³/h or m³/min • Pulse output for m³ or M-Bus (optional) • Inner diameter adjustable by means of keys • Flow meter can be reset • Adjustable by means of keypad on the display: Reference conditions, °C and mbar, 4…20 mA scaling, pulse weight FLOW METERS INSERTION-VERSION VA 500 DESCRIPTION  VA 500 flow sensor in basic version: Standard (92.7 m/s), probe length 220 mm, without display Bi-directional measurement – includes 2 x 4…20 mA analogueue outputs and 2x pulse outputs. These do not apply to Ethernet (PoE) and M-Bus OPTIONS FOR FLOW METERS INSERTION-VERSION VA 500 Display Max version (185 m/s) High-speed version (224 m/s) Low-speed version (50 m/s) 1% accuracy of m.v. ± 0.3 % of f.s. Ethernet interface for VA 500/520 and FA 500 Ethernet interface PoE for VA 500/520 and FA 500 M-Bus board for VA 500/520 and FA 500 Probe length 120 mm Probe length 160 mm Probe length 300 mm Probe length 400 mm Probe length 500 mm Probe length 600 mm G 1/2″ NPT male thread High-pressure protection recommended for installation from 10 to 50 bar (for VA 400/500) ISO calibration certificate (5 calibration points) for VA sensors Gas type:___ (specify gas type when placing order) Gas mixture:___ (specify gas mixture when placing order) Real gas adjustment 3200 0015 Special cleaning oil and grease free (e.g. for oxygen applications) LABS and silicone-free version including cleaning oil and grease-free Additional calibration curve stored in the sensor (can be selected via display) Certificate of origin