Elite Dry Bath Incubator, EL-01-110/220 – Available On Request, Prices in Dollars

Description Elite Dry Bath Incubator, EL-01-110/220 Elite Dry Bath Incubator (single block unit); without block   The Elite Dry Bath Incubator comes in single or dual block modes along with a comprehensive set of interchangeable blocks. It is designed for a variety of applications, including restriction digest, DNA denaturation, melting agar, coagulation studies, hybridization and hot start thermo-cycled reaction. Elite Dry Bath Incubator is recognized as the finest, fastest heating and smallest foot print dry bath incubator. In addition, the aluminum blocks can be removed for the use of a mini water bath or a bead bath. The temperature setpoint can be set in increments of 0.1°C from 5°C above ambient to 150°C. Optional PC control software allows the dry bath incubator to perform real time data recording through a PC.   Features: Digital microprocessor controller confers performance and precise control Broad temperature control range & guaranteed uniformity Excellent heating rate Large LCD screen for instant observation User temperature calibration Can be used as a water bath or bead bath Molded aluminum alloy chamber Optional PC Control software available Specification: Cat. No. EL-01 (Single Block) Display LCD Power 125W Dimension (WxLxH) 5.98″x5.91″x5.31″ (152x150x135mm) Controller Digital microprocess controller Heating chamber Molded Waterproof aluminum alloy coated with PTFE Temperature control range 5°C above ambient to 150°C Temperature increment 0.1°C Temperature uniformity at 37°C ± 0.2°C Temperature accuracy at 37°C ± 0.2°C Timer 99 (hr): 59 (min) / Continuous Safety Leak proof heating chamber Over temperature protection SSR failure detection Operating temperature Ambient to 40°C Block material Aluminum alloy Block type Standard and customized type are available PC Connection RS232 Rated voltage 110V / 220V Weight Approx. 4.6lb (2.1kg) Blocks Single Block Unit Block material Aluminum alloy Dimension (WxLxH) 3.11″x4.09″x1.97″ (79x104x50mm) Block lifter well Yes Thermometer well Yes (except microplate blocks)