Carry case for SD 400 Optical Dissolved Oxygen meter

Spare Carry case for SD 400 Optical Dissolved Oxygen meter, with foam cut out Lovibond's Rugged Meters Lovibond has two variations in this range fo waterproof handheld meters: SD 300 Series Three different models of this meter for the determination of pH/Redox/Temperature, Conductivity/TDS/Salinity/Temperature and? Dissolved oxygen (O2)/O2?-Concentration/O2?-Saturation Temperature SD 300 Additional Display for pH Electrode -?pH Calibration Automatic Buffer Recognition. Permissible electrodes data: Asymmetry: ? 55 mV / Slope: 45 ... 62 mV/pH The condition of pH Electrode is checked at each calibration.? 1, 2 or 3 point calibration with Lovibond? Standard Buffer, DIN 19266 Buffer or any manually entered Buffer values. Redox Measurement (ORP) 2 options: ?mV? Standard Redox or mV measurement "mVH? Conversion to hydrogen systems according to DIN38404 Part 66 rH Measurement -The rH value is calculated from a measured Redox value and a manual input pH value 72 46 10 - SD 300 pH (Set 1) Contents?instrument, batteries, pH/temp. plastic-electrode type 231,pH-buffer-set (pH 4.01/7.00/10.01), in case, manual, warranty information in case 72 46 11 - SD 300 pH (Set 2) Contents?instrument, batteries, but with pH/temperature plastic-electrode type 226, temperature sensor Pt1000, manual, warranty information in case 72 46 00 - SD 300 pH (basic unit) Contents?without electrode, with batteries, protective armouring, instruction manual, warranty information in case SD 310 Oxi Measurement of: Oxygen partial pressure, Oxygen Concentration, Oxygen Saturation, Temperature measurement Automatic absolute air pressure measurement Easy calibration against oxygen in the air Sensor evaluation Salinity correction Self-polarising galvanic oxygen probe allows instant measurement after system is switched on 72 46 50 - SD 310 Oxi (Set 1) Contents?the instrument, batteries, oxygen sensor with 1.5 m cable, electrolyte solution (KOH) 100 ml and 2 pcs. spare membrane heads, instruction manual, warranty information in case 72 46 60 - SD 310 Oxi (Set 2) Contents instrument, batteries, but with oxygen sensor with 10 m cable, electrolyte solution (KOH) 100 ml, spare membrane heads (2 pcs.), instruction manual, warranty information in case 72 46 65 - SD 310 Oxi (Set 3) Contents?instrument, batteries, but with oxygen sensor with 30 m cable, electrolyte solution (KOH) 100 ml, spare membrane heads (2 pcs.), instruction manual, warranty information in case SD 320 Con Salinity measurements - Salinity means the sum of the amount of all dissolved salts in water. The unit is g / kg. TDS measurements (total dissolved solids) - TDS means the mass concentration of dissolved media in a liquid. The unit is mg/l. 5 Ranges Determination of resistivity 4 Cell constants values 72 47 00 - SD 320 Con (Set 1) Contents?instrument, batteries, conductivity cell LC 12 (measuring range 0 - 200 mS/cm), manual, warranty information in case 72 47 20 - SD 320 Con (Set 2) Contents?instrument, batteries, conductivity cell LC 16 (measuring range 0 - 1000 mS/cm), manual, warranty information in case 72 47 10 - SD 320 Con (Set 3) Contents?instrument, batteries, pure water conductivity cell (measuring range 0 - 100 mS/cm) manual, warranty information in case SD 400 Oxi L Measurement of dissolved oxygen at an advanced level. The SD 400 Oxi L allows the measurement of dissolved oxygen in a convenient and simple manner. The determination of dissolved oxygen in water is based on optical luminescence technology. This is characterized by fast response time and a particularly low maintenance requirement. Combined with high accuracy, this technology offers great benefits to the user.? For oxygen measurement by means of luminescence technology, the following advantages are obtained compared to galvanic sensors and Clark sensors: High accuracy No sample flow is needed Low maintenance No oxygen consumption in the measuring medium No pollution of ambient medium Long-life sensor membrane Robust measurement even in sulfide-containing samples Additional features of SD 400 Oxi L Waterproof sensor IP 67 Backlit LCD? Internal data storage Software for monitoring and storage of data Micro USB port Comfortable fitting to BOD Karlsruhe NS 19 / 26 (16.4 mm ? and above) 740000 - SD 400 Oxi L, (Set 1) Contents?instrument, 4 (AA) batteries, optical DO probe with 1.5 m cable, bottle for storage and calibration, Micro SD Card with calibration data, software and full user manual, quick start guide and lanyard in case 740010 - SD 400 Oxi L, (Set 2) Contents?instrument, 4 (AA) batteries, optical DO probe with 3 m cable, bottle for storage and calibration, Micro SD Card with calibration data, software and full user manual, quick start guide and lanyard in case 740020 - SD 400 Oxi L, (Set 3) Contents?instrument, 4 (AA) batteries, optical DO probe with 10 m cable, bottle for storage and calibration, Micro SD Card with calibration data, software and full user manual, quick start guide and lanyard in case ? Portable Hand Held Meters SD300 & SD400 Series Lovibond has two variations in its range of waterproof handheld meters.? These electrochemical measuring instruments are designed for safety, mobility, and ease of data retention and storage. The data loggers regularly save the collected measurement data which can be transferred to the computer via USB interface (serial or analogue). With the SD 305 series, the instrument is protected with armoring and the electrode holders can be handled comfortably with one hand even under adverse conditions. With its luminescence technology and drift-free optical measurement, the SD 400 Oxi L offers analysis at the highest level with low maintenance requirements. ? SD 300 Series ?These are portable handheld instruments for the determination of pH values. It is reliable, waterproof (IP67), and robust, making it an ideal solution for on-site analysis.? Three different models of this meter for the determination of pH/Redox/Temperature, Conductivity/TDS/Salinity/Temperature, and? Dissolved Oxygen (O2)/O2?-Concentration/O2 -Saturation Temperature. Key benefits: Rugged, water-resistant (IP 67) PC interface (USB / serial or analog) Automatic buffer detection Data logger and alarm function (min./max.) Available models: ?Model?Parameter and Range?Electrode?Part Number ?SD 305 pH/ORP pH -2 - 16 Redox -2000.0 - 2000.0 mV Temperature -5 - 150 ? C ?Without electrode ?724630 ?SD 305 pH/ORP (Set 1) ?pH/temp. electrode type 231 (721231) ?724640 ?SD 305 pH/ORP (Set 2) ?pH electrode type 226 (721226) ?724641 ?SD 305 pH/ORP (Set 3) ?Redox, plastic/gel, type 240BNC-plug ?724642 ?SD 315 Oxi (Set 1) Oxygen 0 - 70 mg/l O2 Oxygen 0 - 600 % Temperature 0 - 50 ? C ?Oxygen sensor with 2 m cable ?724680 ?SD 315 Oxi (Set 2) ?Oxygen sensor with 10 m cable ?724690 ?SD 315 Oxi (Set 3) ?Oxygen sensor with 30 m cable ?724695 ?SD 325 Con (Set1) Conductivity 0 - 200 mS/cm Salinity 0 - 70 g/kg TDS 0 - 5000 mg/l Temperature -5 - 100 ? C Conductivity cell LC 12 Measuring range 0-200 mS/cm ?724740 ?SD 325 Con (Set 2) ?Conductivity cell LC 16 Measuring range 0-1000 mS/cm ?724750 ?SD 325 Con (Set 3) ?LC 10 pure water electrode Measuring range 0-200 ?S/cm ?724760 ? SD 400 Oxi L ?SD 400 Oxi L portable meter combines measurement f dissolved oxygen at an advanced level with low maintenance thanks to state-of-the-art luminescence technology it is suitable for research and teaching, use in sewage and waterworks, and aquaristics. The electrode of the SD 400 Oxi L is optimized for standard BOD bottles (NS 19/26). The device is therefore ideally suited for standard-compliant BOD determination of the dilution BOD. Key benefits: Luminescence technology High accuracy Low maintenance Drift-free, optical measurement Available models: ?Model?Parameter and Range?Electrode?Part Number ?SD 400 Oxi L ?Oxygen 0 - 50 mg/l O2 ?Without electrode ?740030 ?SD 400 Oxi L (Set 1) ?Optical DO probe with 1.5 m cable ?740000 ?SD 400 Oxi L (Set 2) ?Optical DO probe with 3 m cable ?740010 ?SD 400 Oxi L (Set 3) ?Optical DO probe with 10 m cable ?740020 ? ? For further information including pricing on set models please contact [email protected]. Servicing Servicing Options Available ? Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate. ? The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration. Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available. ? A typical preventative maintenance service includes the following: Inspection and testing of the unit Dismantling, cleaning and inspection of the key parts Correction of minor defects including adjustments if necessary Reassembly and testing Take post adjustment / cleaning readings Supply of calibration certificate Return of the item to you (back to base services) ? Request a quote for your servicing requirements today. Quote Request Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews Related Blogs What type of electrode should I use to measure Dissolved Oxygen? Quite simply, dissolved oxygen (DO) is free (non-compound) oxygen present?in water. Oxygen dissolves by diffusion from the surrounding air, gained by aeration from turbid water or a waste product of photosynthesis. DO is vital to maintain aquatic life from fish to plants to bacteria and thus an important parameter to be able to measure. There are many factors to take into account when ch...6 years ago Oxygen Meters- SD 400 Oxi L The SD 400 Oxi L is Oxygen meter which allows the measurement of dissolved oxygen (DO) at a high level. This is done thanks to the optical technology of luminescence. It uses an Optical DO probe which has distinct advantages: Low maintenance Easy calibration Fast response High accuracy The applications for this meter include: Waste Water Water Treatment Marine Water Surf...6 years ago Dissolved Oxygen analysis in Wine The level of dissolved oxygen in wine is crucial in ensuring a long life, stable product which won't spoil or age rapidly. Dissolved Oxygen levels are crucial in wine to ensure stable and controlled maturation Colorimetric (colour based) methods of dissolved oxygen testing - such as with Accuvac Ampoules on a?spectro...8 years ago