bioMIXdrive 1 Inductive Magnetic Stirrer – Requires External Controller

Designed for careful and protective mixing of cell suspensions and culture broths, developed for highest demands as well as warming-free and uncompromising continuous operations for e.g. in CO2-incubators.Dust and germ-proofWarming free long term operationIdeal for operation in CO2-incubators? ?2mag bioMIXcontrol Control unit for the connection of 1 stirring drive bioMIXdrive 1, 2, 3, 4 or 6 with 6 watts / stirring point, without any own generated heating effect, extended speed range from 5 to 250 rpm, jerk free stirring, even and smooth stirring also at slow speeds. Power setting (10-steps) for high power with regard to large and viscous stirring amounts and reduced power for the warming free continuous operation e.g. in CO2-incubators. ? Digital display for speed- and power setting, SoftStart for reliable and safe accelerating of stirring bar, QuickSet for quick setting of start and maximum speed, storage of last working status when turning off, firm stainless steel housing, easy to clean ? 2mag bioMIXdrive 1/2/3/4 Warming and maintenance free magnetic stirrer with 1,2,3 or 4 stirring points, large surface, also suitable for viscous culture media. Maintenance free 2mag stepper motor drive for extremely slow and 100% jerk-free and gentle mixing of cell cultures, extended speed range from 5 up to 250 rpm, jerk-free, even and smooth stirring also at slow speeds, suitable for culture flasks with spinning propeller and spinning ball systems. Fully encapsulated and hermetically closed stainless steel housing, IP68, water, dust and germ-proof, extremely robust construction and performance, easy to clean, submersible in water baths, designed for the warming-free long term operation in CO2-incubators, individual measurements on request. Specifications Specifications: Type bioMIXdrive 1 Stirring points 1 Stirring volume/stirring point 5 - 5,000ml Speed range 5 - 250rpm Stirring power/stirring point 5W Material housing Stainless steel Permitted operation conditions -10?C up to +50?C (at 100% humidity) Permitted operation conditions +50?C submerged in water Operating voltage (max) 48VDC Dimensions (WxDxH) 180 x 180 x 38mm Protection category IP68 Weight (gross) 2.5kg Comparison: Type bioMIX 1 bioMIXdrive 1 bioMIXdrive 2 bioMIXdrive 3 bioMIXdrive 4 Stirring points 1 1 2 3 4 Control Internal External External External External Stirring point distance (mm) NA NA 140 140 140 Stirring volume/stirring point 5 - 5,000ml 5 - 5,000ml 5 - 5,000ml 5 - 5,000ml 5 - 5,000ml Speed range 5 - 250rpm 5 - 250rpm 5 - 250rpm 5 - 250rpm 5 - 250rpm Stirring power/stirring point 6W 5W 5W 5W 5W Material housing Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Permitted operation conditions -10?C up to +50?C (at 80% humidity) -10?C up to +50?C (at 100% humidity) -10?C up to +50?C (at 100% humidity) -10?C up to +50?C (at 100% humidity) -10?C up to +50?C (at 100% humidity) Operating voltage (max) 100-240V/50-60Hz/1.5A 48VDC 48VDC 48VDC 48VDC Dimensions (WxDxH) 188 x 238 x 38mm 180 x 180 x 38mm 130 x 270 x 38mm 130 x 410 x 38mm 270 x 270 x 38mm Protection category IP68 IP68 IP68 IP68 IP68 Weight (gross) 3.3kg 2.5kg 2.9kg 4.1kg 5.6kg Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews Related Blogs 2Mag External Controllers and Stirrers 2Mag have a wide range of magnetic stirrers, with some having an internal controller, and others requiring an external controller. The stirrers that require an external controller can be submersed in water baths, up to 95oC. These stirrers come with a single stirring point, or multiple stirring points. Picture of 2mag stirrers and controllers 2mag external controllers -MIXcontrol Ther...2 years ago Stir different samples at different speeds on one unit... Torrey Pines Scientific Inc has launched a range of multi-position analogue magnetic stirrers with 5 or 9 positions which can be independently controlled for maximum flexibility in one unit. They are available as a magnetic stirrer or as a hotplate stirrer. 9 place magnetic stirrer with independent control of each position's stir...9 years ago Product Attachments 2mag_Magnetic_Stirrers_brochure (4.71 MB) More Information More Information ColourBlack