Stuart Undergrad Analogue Hotplates
About the range:
The Stuart Undergrad range has been redesigned with a modern new look and features a selection of magnetic stirrers, hotplates and hotplate stirrers. Each unit has a large square 15cm x 15cm base and a stackable design for saving space whilst not in use. Hotplates are available with either chemically resistant glass ceramic that stays cool around the edges to help prevent burns or coated aluminum top plate for rapid heating and better temperature uniformity.
Features:
Large square 15 x 15cm work plate - easily accomadates up to four 250ml beakers or a large single beaker.?
Choice of ceramic or coated aluminium plate?
Maximum plate temperature of 450?C (ceramic plates) or 325?C (coated Aluminium plates)
Designed with micro-processor controlled dual thermocouples to ensure accurate temperature control and protection from overheating.
?hot? warning light flashes whenever the plate surface temperature is above 50?C and continues to flash until the temperature drops below 50?C, even when unplugged.
Analogue dial to set the plate temperature. They also feature a LED ring surronding the control knob which progressively illuminates showing the increase in plate temperature in real time.
Robust - with a tough aluminium casing to help protect against damage from any knocks.?
Glazed with BioCote? for antimicrobial protection - BioCote is formulation with silver ions and provides built-in antimicrobial protection reducing odor and stain causing microbes on the surface by up to 99.99%. This help prolong instrument lifespan and contributes to a hygienic lab environment.?
Designed to prevent accidental spillage on control panel
IP32 rated for water and dust resistance
All models include an integral fitting for a retort rod and allow the retort base to slide underneath.
Options:?
SCT2 temperature controller (available separately) give you the ability to control the temperature of the sample itself as opposed to just setting the plate temperature - control accuracy of ?1?C can be achieved. (Please note, this does not come with a retort rod which must be purchased separately to mount the controller on).?
Specifications Technical Specifications
Model
US150
UC150
Plate Material
Coated AluminiumSilicon
Glass ceramic
Plate Dimensions, mm
150 x 150
150 x 150
Heated Area, mm
150 x 150
120 x 120
Heater Power, Watt
700
500
Max plate temp, ?:C
325
450
SCT2 Compatible?
Yes
Yes
BioCote Benefits BioCote Benefits
What is BioCote?
BioCote anti-microbial coating additive is present on all Stuart brand equipment and offers anti-microbial action to help prevent cross-contamination.
This unique additive is applied during the manufacturing process and contains trace levels of active silver ions which provide an effective anti-microbial action, active against many strains of common bacteria and fungi, including Aspergillus niger, E.coli and Listeria mono.
This coating remains active for the entire product lifespan and can actually help in prolonging the life of products, where a build up of microbes may cause premature material degradation.
BioCote works by inhibiting bacteria in a number of ways including protein damage, cell membrane damage, oxidative damage and DNA interference. Ultimately, the bacteria are prevented from replicating. Without this, bacteria have been shown to die naturally within around 8 hours. BioCote works in a way different to antibiotics so it is currently effective against antibiotic resistant strains.
More recently, BioCote technology was proven effective against particular virus strains, with a reduction of 90% in 2 hours against feline coronavirus, strain Munich. Read more here.? Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews Related Blogs Stuart Undergrad Hotplate Stirrers now available as a kit with controller included Starter kits are a great option to make sure that everything you need to get started is included in one box, making it easy for you?to begin work quickly. We are big fans of starter kits, from our COD starter package to our vacuum filtration starter kit so we're glad to hear that Stuart's Undergrad hotplate stirrer units are now available as a kit which includes the SCT1 controller and all t...9 years ago Stuart's new heating blocks ensure safe, effective heating for round bottom flasks Stuart Equipment has introduced a new range of heating blocks designed as accessories for the company's Undergrad range of hotplates and hotplate stirrers.? Developed along with Drysyn, a leading supplier of heating blocks, the new Stuart products enable customers to effectively heat round bottom flasks ...9 years ago Product Attachments Undergrad Range Brochure (3.38 MB) More Information More Information ColourWhite
Cole Parmer Stuart Undergrad range of analogue Hotplates. Stuart Undergrad hotplate are available in a choice of coated metal or ceramic tops.
The square design of the hotplate allows flexibility of vessel sizes. With Biocote antimicrobial surfaces.