No products in the cart.
-
Description Fermentation System – Complete System for Batch 16 x 1 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-ChannelFermentation System – Complete System for Batch 16 x 1 ltr – Available On Request, Prices in Dollars
₦29,237.76 -
Description Fermentation System – Complete System for Batch 8 x 1 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Complete System for Batch 8 x 1 ltr – Available On Request, Prices in Dollars
₦17,015.52 -
Description Fermentation System – Condensation Separator for Fermentation Bottles PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Condensation Separator for Fermentation Bottles – Available On Request, Prices in Dollars
₦260.88 -
Description Fermentation System – Fermentation Pot 0.5 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Fermentation Pot 0.5 ltr – Available On Request, Prices in Dollars
₦178.32 -
Description Fermentation System – Fermentation Pot 1 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Fermentation Pot 1 ltr – Available On Request, Prices in Dollars
₦188.40 -
Description Fermentation System – Fermentation Pot 2 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Fermentation Pot 2 ltr – Available On Request, Prices in Dollars
₦229.68 -
Description Fermentation System – Filter 0.45 micron (Set) PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Filter 0.45 micron (Set) – Available On Request, Prices in Dollars
₦62.40 -
Description Fermentation System – Heating Oven FD115 PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Heating Oven FD115 – Available On Request, Prices in Dollars
₦3,618.24 -
Description Fermentation System – Heating Oven FD56 PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Heating Oven FD56 – Available On Request, Prices in Dollars
₦2,803.20 -
Description Fermentation System – Inner Glass Door for Heating Oven FD115 PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Inner Glass Door for Heating Oven FD115r for Gas Tubing – Available On Request, Prices in Dollars
₦2,114.88 -
Description Fermentation System – Inner Glass Door for Heating Oven FD56 PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Inner Glass Door for Heating Oven FD56r for Gas Tubing – Available On Request, Prices in Dollars
₦1,595.04 -
Description Fermentation System – Inside Illumination for Heating Ovens FD Series PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Inside Illumination for Heating Ovens FD Seriesr for Gas Tubing – Available On Request, Prices in Dollars
₦731.76 -
Description Fermentation System – Lead-Through in Top Panel of Incubator for Gas Tubing PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Lead-Through in Top Panel of Incubator for Gas Tubing – Available On Request, Prices in Dollars
₦875.04 -
Description Fermentation System – Stirring device for fermentation pot of PMMA 0.5 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Stirring device for fermentation pot of PMMA 0.5 ltr – Available On Request, Prices in Dollars
₦390.48 -
Description Fermentation System – Stirring device for fermentation pot of PMMA 1.0 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Stirring device for fermentation pot of PMMA 1.0 ltr – Available On Request, Prices in Dollars
₦390.48 -
Description Fermentation System – Stirring device for fermentation pot of PMMA 2.0 ltr PRODUCT DESCRIPTION Maximum precise measurement results with individually calibrated RITTER MilliGascounters RITTER Engineering has been successfully working in the field of plastic engineering for 60 years. Among other products RITTER manufactures Gas Flow Meters made of various superior plastics and high grade stainless steel. RITTER meters are used world-wide in research & development laboratories as well as in industry. The MilliGascounter was developed for the volumetric measurement of the smallest amounts of gas with ultra-low flow rates. These small devices are suitable for measurement of inert, and slightly corrosive biogas, as well as most aggressive gases. Each MilliGascounter is individually calibrated and supplied with an individual calibration certificate. By PTB calibration of RITTER master meters the traceability to the national primary standard for each MilliGascounter is given. As a result, maximum measurement accuracy is guaranteed which provides the necessary basis for any research. In the field of the biogas research the RITTER MilliGascounter became a central component of a system allowing investigation of fermentation processes with up to 16 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time. The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. All temperature deviations can be minimized by e.g. an optional inner glass door of the heating oven for visual inspections. Preconfigured packages The RITTER Biogas Batch Fermentation System is available as a package for 8 or 16 fermentation bottles. For; 8x 1x Heating oven FD56 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 8x MilliGascounters MGC-1 PMMA 8x Tubing connection from fermentation bottle to MilliGascounter 8x Fermentation Glass Bottle, 1 ltr GL 80 8x Stirring device for fermentation bottles 1x Control unit for 8 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 8-Channel 1x Digital Interface Module (»DIM«) 8-Channel 16x 1x Heating oven FD115 with lead-through in heating oven top panel for gas tubing 1x Tube distribution frame for MilliGascounters on top panel of heating oven 16x MilliGascounters MGC-1 PMMA 16x Tubing connection from fermentation bottle to MilliGascounter 16x Fermentation Glass Bottle, 1 ltr GL 80 16x Stirring device for fermentation bottles 1x Control unit for 16 stirring devices incl. power supply unit 1x Licence for »RIGAMO«-Software 16-Channel 1x Digital Interface Module (»DIM«) 16-Channel
Fermentation System – Stirring device for fermentation pot of PMMA 2.0 ltr – Available On Request, Prices in Dollars
₦390.48