Analyticals

Description FURNACE 136CI SSP 240V(2230 w) Perform ultra-high temperature applications with the Thermo Scientific™ Thermolyne™ Industrial Benchtop Muffle Furnace, which reaches a maximum temperature of 1200°C. Includes multiple safety features and choice of two temperature-control options; additionally, heavy-duty firebrick insulation surrounds the opening for added durability. Key Features: Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Counter-weighted door swings upward, directing heat away from operator Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber Door safety switch protects operator by removing power to the heating elements upon opening the door Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only) Single-setpoint Controller (B1): Single ramp to setpoint and a dwell Single display shows actual temperature or setpoint 8-step Programmable Controller (C1): Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes “Holdback” feature “holds” program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance Includes: Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element. Specifications Amperage 9.3 A Capacity (English) 0.08 cu.ft. Certifications/Compliance All units cUL, UL listed; -33 units also CE marked. Depth (English) Interior 9 in. Depth (Metric) Interior 22.8 cm Dimensions (D x W x H) Interior 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5 cm) Dimensions (L x W x H) Exterior 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 16.5 in. Height (English) Interior 3.75 in. Height (Metric) 41.9 cm Height (Metric) Interior 9.5 cm Length (English) 18 in. Length (Metric) 45.7 cm Power Consumption 2230 w Shipping Weight (English) 52 lb. Shipping Weight (Metric) 23.5 kg Temperature Control Digital single setpoint Voltage 240 V Width (English) 4 in. Width (Metric) 27.9 Width (Metric) Interior 10.1 cm Capacity (Metric) 2.2 L Temperature (Metric) 100°C to 1200°C Type Single Setpoint Unit Size Each

Description FURNACE 76CI SSP 240V (CSA approved, CE marked) Reduce energy consumption and increase heatup time with Thermo Scientific™ Thermolyne™ Benchtop 1100°C  Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting gravimetric analysis and for the determination of volatile and suspended solids. Features: available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both sides improves temperature uniformity Drop-down door doubles as a shelf for loading and unloading Door safety switch stops power to heating elements when door is opened Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition 0.95cm (0.38in.) dia. port in chamber rear for monitoring temperatures with independent measuring devices Ordering Information: Accessory heating elements and thermocouples available separately. Includes: Thermocouple, line cord and plug Recommended for: Ashing most types of organic and inorganic samples Heat treating small steel parts Performing ignition tests Conducting gravimetric analysis Determination of volatile and suspended solids Specifications Capacity (English) 0.04 cu.ft. Certifications/Compliance CSA approved, CE marked Depth (English) Interior 5 in. Depth (Metric) Interior 13 cm Description FB1310M-33 Dimensions (D x W x H) Interior 5 x 4 x 3.8 in. (13 x 10.3 x 9.8 cm) Dimensions (L x W x H) Exterior 13 x 9 x 14 in. (33 x 23 x 36 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 14 in. Height (English) Interior 3.8 in. Height (Metric) 36 cm Height (Metric) Interior 9.8 cm Length (English) 13 in. Length (Metric) 33 cm Power Consumption 1060 w Shipping Weight (English) 20 lb. Shipping Weight (Metric) 9 kg Temperature Stability ±0.3 at 1000°C (±7.8 at 1000°C) Voltage 240 V Width (English) 4 in. Width (Metric) 23 Width (Metric) Interior 10.3 cm Capacity (Metric) 1.3 L Temperature (Metric) 100°C to 1100°C Type Single Setpoint

Description FURNACE CERAMIC MUFFLE L9/11/SKM/C550, TMAX.1100  flap door, protective gas connection, hole for thermocouple in furnace door  The muffle furnace L 9/11/SKM is particularly recommended for heat treatment of aggressive substances. The furnace has a ceramic muffle with embedded heating from four sides. The muffle furnace thus combines a very good temperature uniformity with excellent protection of the heating elements from aggressive atmospheres. Another aspect is the smooth, nearly particle free muffle (furnace door made of fiber insulation), an important quality feature. Standard Equipment Tmax 1100 °C Muffle heated from four sides Furnace chamber with embedded ceramic muffle, high resistance to aggressive gasses and vapours Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) Optional flap door (L) which can be used as work platform or lift door (LT) with hot surface facing away from the operator Adjustable working air inlet in the door Exhaust air outlet in rear wall of furnace Controller B510 (5 programs with each 4 segments) Solid state relays provide for lownoise operation Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Additional Equipment Chimney, chimney with fan or catalytic converter Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight Manual or automation gas supply system Port for thermocouple in the rear wall or in the furnace door Process control and documentation via VCD software package for monitoring, documentation and control  Specification Modell Tmax Inner dimensions in mm Volume Outer dimensions2 in mm Connected Electrical Weight Heating time in °C1 w d h in l W D H load in kW connection* in kg in min4 L 9/11/SKM 1100 230 240 170 9 490 505 580 3.4 1-phase 50 75 LT 9/11/SKM 1100 230 240 170 9 490 505 580+3203 3.4 1-phase 50 75 1Recommended working temperature for processes with longer dwell times is 1000 °C*Please see page 75 for more information about supply voltage 2External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. 3Including opened lift door 4Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE)