Lab Furniture

Central Housing Box For Services About the range: KitLab, supplied by Allschoolabs is a modular range of laboratory furniture. It is composed of high quality materials and its main benefit is that it is very easy to install and assemble. Its modular design allows for easy upgrade and expansions to reflect any changing needs of the lab. Kitlab is highly customisable with a choice of colours and many additional extras that can be purchased. If you require customisation to your pieces, please contact us for assistance. The Kitlab range comprises of benches, cabinets, cupboards, sinks and more, including any extra fittings required. Kitlab benches are 900mm high as standard and constructed of laminate with areas covered in water-resistant white melamine. This central housing box is a raised melamine compartment on brackets designed to house services. Each also comes with a central strip used to connect the two lab benches together. The total width is 300mm. Each housing box is supplied with: Melamin compartment? Laminated brackets 300mm wide composite resin central strip Customisation: Gas Taps Electrical outlets? Other pieces available in the range: The following pieces are also available. Each bench is available with and without a skirting shelf. Dry bench? Wet Bench with sink Bench with cut out for placing under fume hood Sink unit Corner piece Weighing table Feefo Reviews Product Attachments KIT LAB Brochure 2021 - Allschoolabs(1.85 MB) Worktop Materials Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type: Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges. Enamelled Glass ? This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270?C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front. TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180?C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used. Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.

Feefo Reviews Worktop Materials Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type: Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges. Enamelled Glass ? This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270?C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front. TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180?C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used. Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.

white melamine veneered panels (inside and outside) drawers: with slide and metallic sides with a food quality epoxy coatings, bottom and back in melamin 16mm each drawer can support a weight of up to 35 kg invisible hinges: opening at 165° 1 adjustable shelf on bracket Cupboard with 4 rollers (diam.80mm), two of which are fitted with a brake NOTE: these cupboards are delivered already assembled Feefo Reviews Worktop Materials Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type: Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges. Enamelled Glass ? This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270?C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front. TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180?C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used. Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.

Supplied ready assembled. White, waterproof melamin coated dense chipboard (inside and outside)White frosted finish2 vertical drawer units on telescopic supports (max load 100kg). 12 shelves with raised edges - (6 shelves per drawer)Wall fixing accessories are included - the top of this unit must be screwed to the wall (1 attachment point)Supplied ready assembledEach shelf is 640mm long x 205mm wide x 40mm highAbout 200mm space between shelves (depending on positioning of the shelf)On each drawer, shelves 3 and 6 (half way down and at the bottom) are fixed position, the other 4 shelves are adjustable in positionNB It is important that the unit is fixed to the wall.Dimensions: 600mm x 2000mm x 750mm (WxHxD) Feefo Reviews Worktop Materials Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type: Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges. Enamelled Glass ? This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270?C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front. TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180?C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used. Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.

Wall mounted Azlon draining rack offers superior heat and chemical resistance with a polyamide epoxy coating. Manufactured from polyamide epoxy coated steel Offers better heat and chemical resistance than other coatings There are eight pegs 110mm long and twenty four pegs 80mm in length. Peg diameter is 4.5mm Overall dimensions of the rack are 410 x 300mm Cleaning, autoclaving and maintenance plasticware Azlon??plasticware is reusable but how long it lasts depends on how well you treat it! Follow these guidelines to keep your Azlon??plasticware in the best possible condition. 1. What chemicals are coming into contact with your plasticware? Chemicals can adversely affect the performance of plasticware even resulting in damage. Make sure you use the most suitable polymer for the chemical. For example, if you are working with Acetone you should always choose LDPE over HDPE as products made of HDPE are likely to incur immediate damage. Why not consult the plastic technical guide if you are unsure. 2. How do you wash and clean your Azlon??plasticware? Azlon??plasticware should be cleaned in warm water with Lipsol detergent and a soft cloth or sponge. To prevent scratching and ink removal, abrasive cleaners and scouring pads should be avoided. If you?re using an automatic laboratory washing machine, be sure to use temperatures below 60?C. This is especially important for volumetric plasticware as high temperatures can affect their accuracy. 3. Can Azlon??products be autoclaved? A selection of Azlon??products are suitable for autoclaving. In general, if a product is made from polypropylene or PMP, it is suitable for autoclaving at 121?C or 135?C respectively. If you are still unsure then look at the 'A' symbol as all items that are autoclavable display a red Azlon??symbol next to them. When autoclaving plastic bottles care must be taken to ensure that the cap is completely loosened to prevent deformation of the bottle. Reattaching the cap before the bottle has sufficiently cooled will also cause deformation. We recommend completely removing the cap before autoclaving and attaching the cap to the side of the bottles with autoclave tape to keep track of the components. We hope these guidelines help your Azlon??plasticware last longer and don?t forget to contact us if you have any questions! Information has been? provided by DWK Ltd. Feefo Reviews

Laboratory Benches With Skirting Shelf - 900 or 750mm total depthAbout the range: KitLab, supplied by Allschoolabs is a modular range of laboratory furniture. It is composed of high quality materials and its main benefit is that it is very easy to install and assemble. Its modular design allows for easy upgrade and expansions to reflect any changing needs of the lab. Kitlab is highly customisable with a choice of colours and many additional extras that can be purchased. If you require customisation to your pieces, please contact us for assistance. The Kitlab range comprises of benches, cabinets, cupboards, sinks and more, including any extra fittings required. Kitlab benches are 900mm high as standard and constructed of laminate with water-resistant white melamine in areas, with any edges covered in plastic. Benches with skirting are available in choice of four worktop materials and in a number of widths up to 1800mm wide. Additionally, benches are available in a choice of two depths ? 750mm (featuring a 600mm deep metal sub frame) or 900mm (featuring a 750mm deep metal sub frame). The width of the skirting shelf is 160mm including a 10mm overhang. Each bench is supplied with: 1 x dry worktop in 600mm or 750mm depth (with the shelf, this makes the total depth either 750mm or 900mm) 1 x 160mm wide shelf (when assembled this has a 10mm overhang) 2 or 3 x shelf supports (dependent on width) Epoxy coated metal frame (red as standard but also available in white). For 750mm deep benches, the frame depth is 600mm. For 900mm deep benches, the frame depth is 750mm. Frames have two legs for benches up to 1500mm wide and three legs for those that are 1800mm wide. 1 x fascia strip (white as standard, choice of yellow or blue) 1 x fluid back panel 1 x assembly strip 1 predrilled skirting (750mm frame only) Worktop Materials Benches are available in a choice of four worktop materials Moulded laminate Enamelled glass TRESPA Sandstone For a detailed guide to the technical specification of each material type, please read the ?Worktop Materials? tab. Customisation: Choice of colours (red frame and white fascia strip supplied as standard, contact us if you require non-standard colours) Sliding door kit to enclose the bottom of benches-? Taps Electrical sockets Other benches available in the range: The following bench pieces are also available. Each piece is available with and without a skirting shelf. Dry bench without skirting (choice of 600mm or 750mm total depth) Wet Bench with sink Bench with cut out for placing under fume hood Sink unit Corner piece Weighing table Feefo Reviews Product Attachments KIT LAB Brochure 2021 - Allschoolabs(1.85 MB) Worktop Materials Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type: Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges. Enamelled Glass ? This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270?C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front. TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180?C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used. Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.

A range of pegs/rods for use with B?rkle drying racks and benchtop drainers.NB these are replacement / additional pegs only - the drying rack itself is not included. Please see the drying racks listed separately. Feefo Reviews