Key features

Includes a Fluke 1587 FC 2-in-1 Insulation DMM, Fluke i400 Current Clamp, and a Fluke 9040 Phase Rotation Indicator

With the Fluke 1587 FC, perform insulation tests, plus a wide-range of DMM tasks with confidence and ease

Use the Fluke i400 with your Fluke 1587 FC to accurately measure AC current without breaking the circuit

Check the rotation of three-phase motors easily and safely with the Fluke 9040

The Fluke 1587 FC 2-in-1 Insulation DMM

Pl/DAR measurements with TrendIt™ graphs

Memory storage through Fluke Connect Measurements app

Temperature Compensation through Fluke Connect Measurements app

VFD low-pass filter for accurate motor drive measurements

Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V

Insulation test voltages 500 V, 1000 V

Insulation test: 0.01 MΩ to 2.0 GΩ

Insulation test: 0.1 MΩ to 600 MΩ

Auto-discharge of capacitive voltage

Insulation test smoothing reading

Frequency / Capacitance / Diode test / Temperature

Min/Max / AC/DC Voltage / DC Millivolts / AC/DC Milliamps

Resistance (0.1 Ω to 50 MΩ) / Continuity / Auto power off

Three-year warranty / Remote probe, test leads, alligator clips, K-type thermocouple, hard case

Fluke i400 AC Current Clamp

Use with your Fluke 1587 FC to measure 1A AC to 400 A AC

1 mA/Amp output guarantees easy reading

CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection

Specially designed to offer maximum utility in a very compact shape

Maximum conductor: Ø 32 mm

1 year warranty

Fluke 9040 Phase Rotation Indicator

Large display to easily determine field rotation and phase sequence

Indication for all three phases

CAT III 600 V overvoltage rating

2 year warranty

Product overview: Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit

The Fluke 1587 FC Insulation Multimeter features four powerful new diagnostic functions through the Fluke Connect Measurements app:

Pl/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated insulation problems faster

Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time

Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons

Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect® Assets

The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.
Fluke 9040 Phase Rotation Indicator is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. It allows rapid determination of phase sequence and ideally suited for commercial and industrial applications.

Specifications: Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit

Fluke 1587 FC Insulation Multimeter
Electrical Specifications
AC voltage measurement
Range
600.0 mV
Resolution
0.1 mV
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts)
±(2% + 3)
6.000 V
Resolution
0.001 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts)
±(2% + 3)
60.00 V
Resolution
0.01 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts)
±(2% + 3)
600.0 V
Resolution
0.1 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts)
±(2% + 3)¹
1000 V
Resolution
1 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(2% + 3)
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts)
±(2% + 3)¹
¹ 1 kHz bandwidth
Low-Pass Filter Voltage 
Range
600.0 mV
Resolution
0.1 mV
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts)
+(2% + 3), -(6% – 3)
6.000 V
Resolution
0.001 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts)
+(2% + 3), -(6% – 3)
60.00 V
Resolution
0.01 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts)
+(2% + 3), -(6% – 3)
600.0 V
Resolution
0.1 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(1% + 3)
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts)
+(2% + 3), -(6% – 3)
1000 V
Resolution
1 V
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts)
±(2% + 3)
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts)
+(2% + 3), -(6% – 3)
DC Voltage Measurement
Range
Resolution
Accuracy ±(% of Rdg + Counts)
6.000 V dc
0.001 V
±(0.09% + 2)
60.00 V dc
0.01 V
±(0.09% + 2)
600.0 V dc
0.1 V
±(0.09% + 2)
1000 V dc
1 V
±(0.09% + 2)
Input impedance 
10 MΩ (nominal), <100 pF Normal mode rejection ratio  >60 dB @ 50 Hz or 60 Hz
Common mode rejection ratio 
>120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)
Accuracies apply to ± 100% of range
DC Millivolts Measurement
Range
Resolution
Accuracy ±(% of Rdg + Counts)
600.0 mVdc
0.1 mV
±(0.1% + 1)
DC and AC Current Measurement
AC 45 Hz to 1000 Hz
Range
400 mA
Resolution
0.1 mA
Accuracy ±(% of Rdg+Counts)
±(1.5% + 2)¹
Burden voltage (Typical)
2 mV/mA
Range
60 mA 
Resolution
0.01 mA 
Accuracy ±(% of Rdg+Counts)
±(1.5% + 2)¹
Burden voltage (Typical)
2 mV/mA
DC
Range
400 mA
Resolution
0.1 mA
Accuracy ±(% of Rdg+Counts)
±(0.2% + 2)
Burden voltage (Typical)
2 mV/mA
Range
60 mA
Resolution
0.01 mA
Accuracy ±(% of Rdg+Counts)
±(0.2% + 2)
Burden voltage (Typical)
2 mV/mA
Overload
600 mA for 2 minutes maximum
Fuse protection for mA input
0.44 mA, 1000 V, IR 10 kA
AC conversion
Inputs are ac-coupled and calibrated to the rms value of sine wave input
Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3.
¹ 1 kHz bandwidth
Ohms Measurement
Range
Resolution
Accuracy +(% of Rdg+Counts)¹
600.0 Ω
0.1 Ω
±(0.9% + 2)
6.000 kΩ
0.001 kΩ
±(0.9% + 2)
60.00 kΩ
0.01 kΩ
±(0.9% + 2)
600.0 kΩ
0.1 KΩ
±(0.9% + 2)
6.000 MΩ
0.001 MΩ
±(0.9% + 2)
50.0 MΩ ²
0.01 MΩ
±(1.5% + 3)
Overload protection 
1000 V rms or dc
Open circuit test voltage 
<8.0 V dc Short circuit current  <1.1 mA ¹ Accuracies apply from 0% to 100% of range ² Up to 80% relative humidity Diode Test Diode test indication Display voltage drop: 0.6 V at1.0 mA nominal test current: Accuracy ±(2% + 3) Continuity Test Continuity indication Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω Open circuit voltage <8.0 V Short circuit current 1.0 mA typical Overload protection 1000 V rms Response time >1 m sec
Frequency Measurement
Range
Resolution
Accuracy ±(% of Rdg+Counts)
99.99 Hz 
0.01 Hz 
±(0.1% + 1)
999.9 Hz 
0.1 Hz 
±(0.1% + 1)
9.999 kHz 
0.001 kHz 
±(0.1% + 1)
99.99 kHz 
0.01 kHz 
±(0.1% + 1)
Frequency Counter Sensitivity
600.0 mV ac 
V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz 
100.0 mV 
V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz
150.0 mV 
DC Trigger Levels¹ to 20 kHz²
NA
6.0 V 
V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz 
1.0 V 
V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz
1.5 V 
DC Trigger Levels¹ to 20 kHz²
-400.0 mV and 2.5 V
60.0 V 
V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz 
10.0 V 
V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz
36.0 V 
DC Trigger Levels¹ to 20 kHz²
1.2 V and 4.0 V
600.0 V 
V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz 
100.0 V 
V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz
–
DC Trigger Levels¹ to 20 kHz²
12.0 V and 40.0 V
1000.0 V 
V ac Sensitivity (RMS Sine Wave)¹  5 Hz to 20 kHz 
300.0 V 
V ac Sensitivity (RMS Sine Wave)¹  20 kHz to 100 kHz
–
DC Trigger Levels¹ to 20 kHz²
12.0 V and 40.0 V
¹ Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy
² Usable to 100 kHz with full scale input
Capacitance
Range 
Resolution 
Accuracy ±(% of Rdg+Counts)
1000 nF 
1 nF
±(1.2% + 2)
10.00 μF 
0.01 μF
±(1.2% + 2)
100.0 μF 
0.1 μF
±(1.2% ±90 counts)
9999 μF 
1 μF
±(1.2% ±90 counts)
Temperature Measurement
Range 
Resolution 
Accuracy ±(% of Rdg+Counts)¹
-40 ° C to 537 ° C 
0.1 °C 
±(1% + 10 counts)
-40 ° F to 998 ° F 
0.1 °F 
±(1% + 18 counts)
¹ Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument
Insulation Specifications
Measurement range
0.01 MΩ to 2 GΩ
Test voltages
50, 100, 250, 500, 1000 V
Test voltage accuracy
+20%, -0%
Short-circuit test current
1 mA nominal
Auto discharge
Discharge time <0.5 second for C = 1 μF or less Live circuit detection Inhibit test if terminal voltage > 30 V prior to initialization of test
Maximum capacitive load
Operable with up to 1 μF load
Output Voltage
50 V (0% to +20%)
Display range
0.01 to 6.00 MΩ
Resolution
0.01 MΩ
Test current
1 mA @ 50 kΩ
Resistance accuracy ±(% of Rdg + Counts)
±(3% + 5 counts)
Display range
6.0 to 50.0 MΩ
Resolution
0.1 MΩ
Test current
1 mA @ 50 kΩ
Resistance accuracy ±(% of Rdg + Counts)
±(3% + 5 counts)
100 V (0% to +20%)
Display range
0.01 to 6.00 MΩ
Resolution
0.01 MΩ
Test current
1 mA @ 100 kΩ
Resistance accuracy ±(% of Rdg + Counts)
±(3% + 5 counts)
Display range
6.0 to 60.0 MΩ
Resolution
0.1 MΩ
Test current
1 mA @ 100 kΩ
Resistance accuracy ±(% of Rdg + Counts)
±(3% + 5 counts)
Display range
60 to 100 MΩ 
Resolution
1 MΩ
Test current
1 mA @ 100 kΩ
Resistance accuracy ±(% of Rdg + Counts)
±(3% + 5 counts)
250 V (0% to +20%)
Display range
0.1 to 60.0 MΩ 
Resolution
0.1 MΩ
Test current
1 mA @ 250 kΩ 
Resistance accuracy ±(% of Rdg + Counts)
±(1.5% + 5 counts)
Display range
60 to 250 MΩ 
Resolution
1 MΩ
Test current
1 mA @ 250 kΩ 
Resistance accuracy ±(% of Rdg + Counts)
±(1.5% + 5 counts)
500 V (0% to +20%)
Display range
0.1 to 60.0 MΩ
Resolution
0.1 MΩ
Test current
1 mA @ 500 kΩ 
Resistance accuracy ±(% of Rdg + Counts)
±(1.5% + 5 counts)
Display range
60 to 500 MΩ
Resolution
1 MΩ
Test current
1 mA @ 500 kΩ 
Resistance accuracy ±(% of Rdg + Counts)
±(1.5% + 5 counts)
1000 V (0% to +20%)
Display range
0.1 to 60.0 MΩ 
Resolution
0.1 MΩ
Test current
1 mA @ 1 MΩ
Resistance accuracy ±(% of Rdg + Counts)
±(1.5% + 5 counts)
Display range
60 to 600 MΩ 
Resolution
1 MΩ
Test current
1 mA @ 1 MΩ
Resistance accuracy ±(% of Rdg + Counts)
±(1.5% + 5 counts)
Display range
0.6 to 2.0 GΩ 
Resolution
100 MΩ 
Test current
1 mA @ 1 MΩ
Resistance accuracy ±(% of Rdg + Counts)
±(10% + 3 counts)
General Specifications
Maximum voltage applied to any terminal and common
1000 V
Storage temperature
-40 °C to 60 °C (-40 °F to 140 °F)
Operating temperature
-20 °C to 55 °C (-4 °F to 131 °F)
Temperature coefficient
0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)
Relative humidity
Noncondensing
0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F)
0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F)
0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)
Vibration
Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
Radio frequency communication
2.4 GHz ISM Band
Radio frequency certification
FCC: T68-FBLE, IC: 6627A-FBLE
Electromagnetic Compatibility 
International
IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes.  There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
Korea (KCC)
Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
USA (FCC)
47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Enclosure protection
IEC 60529: IP40 (non-operating)
Safety
IEC 61010-1
Pollution Degree 2
IEC 61010-2-033
CAT IV 600 V / CAT III 1000 V
Batteries 
Four AA batteries (NEDA 15A or IEC LR6)
Battery life
Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Size (H x W x L)
5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
Weight
550 g (1.2 lb)
Altitude
Operating
2000 m
Storage
12,000 m
Over-range capability
110% of range except for capacitance which is 100%
Frequency overload protection
<107 V Hz Fuse protection for mA input 0.44A, 1000 V, IR 10 kA Fluke i400 AC Current Clamp Specifications Nominal current range 400  A Continuous current range 1 A - 400 A Maximum non-destructive current 1000 A Lowest measurable current 1 A Basic accuracy 2% + 0.06 A (45-400 Hz) (% reading + floorspec) Useable frequency 5 Hz - 20 kHz Output level(s) 1 mA/A Safety Specifications Safety CAT IV 600 V, CAT III, 1000 V Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010 Mechanical and General Specifications Warranty 1 year Maximum conductor diameter 32 mm (1.25 in) Maximum conductor size (busbar) 750 MCM Output cable length 1.5 m (59 in) Shrouded banana plugs Yes Fluke 9040 Phase Rotation Indicator Technical Specifications Voltage range 40-700 V Frequency range 15-400 Hz Operating timer Continuous Environmental Specifications Operating temperature 0 °C to 40 °C Dust/water resistance IP 40 Safety Specifications Electrical safety EN 61010,  EN 61557-7 Overvoltage category CAT III, 600 V CAT IV, 300V Mechanical and General Specifications Size 124 x 61 x 27 mm Weight 200 g Power supply From unit under test Warranty 2 years Reference Specific ReferencesCondition New product Andrew U03/20/2020Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kitinteresting to useWrite your reviewFluke 1587/MDT FC Advanced Motor and Drive Troubleshooting KitQuality12345Delivery12345Communication12345Pricing12345Title for your review*Your review*Required fields* Send or Cancel