Additional information
Reviews (0)
Weight
0.000000 kg
Dimensions
0.000000 × 0.000000 × 0.000000 cm
Reviews
There are no reviews yet.
Write a review Cancel replyYou must be logged in to post a review.
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user.
Benefits include:
Small footprint
Simple, intuitive operation
Manual, analogue control and RS232 interface
Self-priming, can run dry
Simple calibration
Available with different material configurations for chemical resistance
Consistent, reliable flow rate
Available pump head materials: PP, PVDF, PTFE
Diaphragm materials: PTFE-coated, FFKM
Valve material: FFKM
Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews More Information More Information Oil free?Yes
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user.
Benefits include:
Small footprint
Simple, intuitive operation
Manual, analogue control and RS232 interface
Self-priming, can run dry
Simple calibration
Available with different material configurations for chemical resistance
Consistent, reliable flow rate
Available pump head materials: PP, PVDF, PTFE
Diaphragm materials: PTFE-coated, FFKM
Valve material: FFKM
Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews More Information More Information Oil free?Yes
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user.
Benefits include:
Small footprint
Simple, intuitive operation
Manual, analogue control and RS232 interface
Self-priming, can run dry
Simple calibration
Available with different material configurations for chemical resistance
Consistent, reliable flow rate
Available pump head materials: PP, PVDF, PTFE
Diaphragm materials: PTFE-coated, FFKM
Valve material: FFKM
Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews More Information More Information Oil free?Yes
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user.
Benefits include:
Small footprint
Simple, intuitive operation
Manual, analogue control and RS232 interface
Self-priming, can run dry
Simple calibration
Available with different material configurations for chemical resistance
Consistent, reliable flow rate
Available pump head materials: PP, PVDF, PTFE
Diaphragm materials: PTFE-coated, FFKM
Valve material: FFKM
Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews More Information More Information Oil free?Yes
DAPAVEL M 5/500MG STRIP OF 10 TABLETS ₦1,701.50
POWERCORT 0.05% CREAM 30GM ₦2,310.00
FESTIVE MZ BOTTLE OF 30ML SYRUP ₦1,382.00
GLYNAMIC M 2MG FORTE TABLETS 10?S ₦2,372.00
Imunol Ointement 10gram ₦460.00
CARVISTAR 3.125MG TAB 10`S ₦912.25
ETOGESIC 400MG TABLET ₦2,015.00
Felvin medication is used to treat mild to moderate pain, or signs and symptoms of osteoarthritis or rheumatoid arthritis.
Felvin Tablet?is used to relieve the signs and symptoms of swollen, stiffed, warm or painful joints.
Additional information Reviews (0) Weight 0.000000 kg Dimensions 0.000000 × 0.000000 × 0.000000 cm Reviews There are no reviews yet. Write a review Cancel replyYou must be logged in to post a review.
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user. Benefits include: Small footprint Simple, intuitive operation Manual, analogue control and RS232 interface Self-priming, can run dry Simple calibration Available with different material configurations for chemical resistance Consistent, reliable flow rate Available pump head materials: PP, PVDF, PTFE Diaphragm materials: PTFE-coated, FFKM Valve material: FFKM Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews More Information More Information Oil free?Yes
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user. Benefits include: Small footprint Simple, intuitive operation Manual, analogue control and RS232 interface Self-priming, can run dry Simple calibration Available with different material configurations for chemical resistance Consistent, reliable flow rate Available pump head materials: PP, PVDF, PTFE Diaphragm materials: PTFE-coated, FFKM Valve material: FFKM Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews More Information More Information Oil free?Yes
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user. Benefits include: Small footprint Simple, intuitive operation Manual, analogue control and RS232 interface Self-priming, can run dry Simple calibration Available with different material configurations for chemical resistance Consistent, reliable flow rate Available pump head materials: PP, PVDF, PTFE Diaphragm materials: PTFE-coated, FFKM Valve material: FFKM Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews More Information More Information Oil free?Yes
The KNF SIMDOS? (02 and 10) range offer laboratories simple liquid dosing in an accurate, reliable and compact unit.?These pumps have a minimal footprint and can be set to dose a given volume over a given time period, both user-definable. Alternatively, a given flow rate over a given time period can be set. A cycle mode allows the setting of pause and repeat values.The set-up is intuitive and simple using the push turn control knob. The display shows flow time and volume dispensed alolowing easily calibratedby the user. Benefits include: Small footprint Simple, intuitive operation Manual, analogue control and RS232 interface Self-priming, can run dry Simple calibration Available with different material configurations for chemical resistance Consistent, reliable flow rate Available pump head materials: PP, PVDF, PTFE Diaphragm materials: PTFE-coated, FFKM Valve material: FFKM Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews More Information More Information Oil free?Yes