Product OverviewFluoride 1000ug/mL, 125 ML1000ug/mL FLUORIDE 125mL
Matrix:
Water
Starting Material:
NaFProduct More SpecificationsMade InUSAThere are no reviews for this product.Write a review
Your Name
Your ReviewNote: HTML is not translated!
Rating
Bad
Good Captcha Please complete the captcha validation below
Continue
Get your Fluoride Application today at Allschoolabs Clicnicn in Gayaza. The fluoride formula works by strengthening the enamel on your teeth, making them more resistant to decay and damage. It also helps to prevent cavities and plaque build-up, leaving you with a brighter and healthier smile. Whether you have sensitive teeth or simply want to maintain a healthy and sparkling smile, this service is the perfect solution.
These electrodes can be used with any conventional laboratory or handheld pH meter with a milivolt mode. Standard products are fitted with 1 metre of cable terminated with a BNC connector. Other cable lengths availableNo reference electrode neededAvailable in fully submersible and water proof formatSolid State SensorsIdeal for unskilled operativesNo filling solutionVirtually unbreakableCan be left dry for long periodsLong lifetime Feefo Reviews More Information More Information Electrode body materialEpoxy Electrode connectorBNC
Description
Fluoride HR, SPADNS method, Reagent kit for 100 tests (F- HR)
The HI93739-01 are reagents for the colorimetric determination of fluoride, for use with Hanna’s compatible HI96739 portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability.
Pre-dosed reagents for ease of use
Supplied with certificate of quality
Marked with expiration date and lot number for traceability
The HI93739-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of EPA method 340.1 and the SPADNS method. The reaction between fluoride and the reagent causes a color change in the sample. By simply adding the reagents to the sample in the correct order, the reaction will take place and Hanna’s compatible HI96739 portable photometer will determine the concentration from the color that is produced. The results will be displayed in mg/L (ppm) of fluoride. These reagents are designed to be used with samples that have an expected range of 0.0 to 20.00 mg/L fluoride.
Description
Fluoride LR, SPADNS method, Reagent kit for 100 tests (F- LR)
The HI93729-01 are reagents for the colorimetric determination of fluoride. There are enough reagents for 100 tests to be used with a compatible benchtop or portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability.
Pre-dosed reagents for ease of use
Supplied with certificate of quality
Marked with expiration date and lot number for traceability
The HI93729-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the EPA method 340.1 and SPADNS method. The reaction between fluoride and the reagent causes a color change in the sample. By simply adding the reagent to the sample, a reaction will take place and a compatible benchtop or portable meter can be used to determine the concentration from the color that is produced. The results will be displayed in mg/L (ppm) of fluoride. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.00 mg/L fluoride.
Compatible Photometers Include:
HI83099
HI83200
HI83208
HI96729
Product OverviewFluoride standard solution 1000 ?g/ml for IC (Ion HIQU)2.21 g NaF / l H2OSolution contains 1000 ?g/ml of F- (?7 ?g - 20?C)Traceability: Reference standards acc. NIST SRM?3183CL01.0611CAS Nr:7681-49-4PhysicalForm:?liquid
Colour:?colourless
Melting point:?0?C
Boiling point:?100?C
Flash point:?-?
Density:?1,00 g/ml
Mol Weight:?41.99 g/mol
Storage temp:?2?C to 8?C
Package Size: 500 MLThere are no reviews for this product.Write a review
Your Name
Your ReviewNote: HTML is not translated!
Rating
Bad
Good Captcha Please complete the captcha validation below
Continue
There are no reviews for this product.Write a review
Your Name
Your ReviewNote: HTML is not translated!
Rating
Bad
Good Captcha Please complete the captcha validation below
Continue
There are no reviews for this product.Write a review
Your Name
Your ReviewNote: HTML is not translated!
Rating
Bad
Good Captcha Please complete the captcha validation below
Continue
There are no reviews for this product.Write a review
Your Name
Your ReviewNote: HTML is not translated!
Rating
Bad
Good Captcha Please complete the captcha validation below
Continue
Fluorometholone is a suspension used in treatment of eye swellings/inflammation caused by infections. It can be used for treating eye injury,surgery or other conditions.
ERLOCIP 100MG TABLET ₦111,730.25
ARRENO CAP 10`S ₦721.00
BACTOGARD 100 DRY SYP 30ML ₦3,852.25
EXERMET GM FORTE 1MG STRIP OF 10 TABLETS ₦1,996.50
FURAMIST NASAL SPRAY 6GM ₦9,643.50
GLISEN VM 2MG TAB 10`S ₦4,310.50
CeraVe Hydrating Cream to Foam Cleanser ₦28,256.59
EXAFIB 20MG STRIP OF 14 TABLETS ₦12,387.50
Product OverviewFluoride 1000ug/mL, 125 ML1000ug/mL FLUORIDE 125mL Matrix: Water Starting Material: NaFProduct More SpecificationsMade InUSAThere are no reviews for this product.Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below Continue
Get your Fluoride Application today at Allschoolabs Clicnicn in Gayaza. The fluoride formula works by strengthening the enamel on your teeth, making them more resistant to decay and damage. It also helps to prevent cavities and plaque build-up, leaving you with a brighter and healthier smile. Whether you have sensitive teeth or simply want to maintain a healthy and sparkling smile, this service is the perfect solution.
These electrodes can be used with any conventional laboratory or handheld pH meter with a milivolt mode. Standard products are fitted with 1 metre of cable terminated with a BNC connector. Other cable lengths availableNo reference electrode neededAvailable in fully submersible and water proof formatSolid State SensorsIdeal for unskilled operativesNo filling solutionVirtually unbreakableCan be left dry for long periodsLong lifetime Feefo Reviews More Information More Information Electrode body materialEpoxy Electrode connectorBNC
Description Fluoride HR, SPADNS method, Reagent kit for 100 tests (F- HR) The HI93739-01 are reagents for the colorimetric determination of fluoride, for use with Hanna’s compatible HI96739 portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability. Pre-dosed reagents for ease of use Supplied with certificate of quality Marked with expiration date and lot number for traceability The HI93739-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of EPA method 340.1 and the SPADNS method. The reaction between fluoride and the reagent causes a color change in the sample. By simply adding the reagents to the sample in the correct order, the reaction will take place and Hanna’s compatible HI96739 portable photometer will determine the concentration from the color that is produced. The results will be displayed in mg/L (ppm) of fluoride. These reagents are designed to be used with samples that have an expected range of 0.0 to 20.00 mg/L fluoride.
Description Fluoride ion electrode For T-713F, S-613F
Description Fluoride LR, SPADNS method, Reagent kit for 100 tests (F- LR) The HI93729-01 are reagents for the colorimetric determination of fluoride. There are enough reagents for 100 tests to be used with a compatible benchtop or portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability. Pre-dosed reagents for ease of use Supplied with certificate of quality Marked with expiration date and lot number for traceability The HI93729-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the EPA method 340.1 and SPADNS method. The reaction between fluoride and the reagent causes a color change in the sample. By simply adding the reagent to the sample, a reaction will take place and a compatible benchtop or portable meter can be used to determine the concentration from the color that is produced. The results will be displayed in mg/L (ppm) of fluoride. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.00 mg/L fluoride. Compatible Photometers Include: HI83099 HI83200 HI83208 HI96729
Product OverviewFluoride standard solution 1000 ?g/ml for IC (Ion HIQU)2.21 g NaF / l H2OSolution contains 1000 ?g/ml of F- (?7 ?g - 20?C)Traceability: Reference standards acc. NIST SRM?3183CL01.0611CAS Nr:7681-49-4PhysicalForm:?liquid Colour:?colourless Melting point:?0?C Boiling point:?100?C Flash point:?-? Density:?1,00 g/ml Mol Weight:?41.99 g/mol Storage temp:?2?C to 8?C Package Size: 500 MLThere are no reviews for this product.Write a review Your Name Your ReviewNote: HTML is not translated! Rating Bad Good Captcha Please complete the captcha validation below Continue
