Customer matched zone "Lagos Delivery Options"
Sort by:
132161–132176 of 365180 Results
-
Description FURNACE 136CI SSP 240V(2230 w) Perform ultra-high temperature applications with the Thermo Scientific™ Thermolyne™ Industrial Benchtop Muffle Furnace, which reaches a maximum temperature of 1200°C. Includes multiple safety features and choice of two temperature-control options; additionally, heavy-duty firebrick insulation surrounds the opening for added durability. Key Features: Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Counter-weighted door swings upward, directing heat away from operator Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber Door safety switch protects operator by removing power to the heating elements upon opening the door Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only) Single-setpoint Controller (B1): Single ramp to setpoint and a dwell Single display shows actual temperature or setpoint 8-step Programmable Controller (C1): Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes “Holdback” feature “holds” program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance Includes: Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element. Specifications Amperage 9.3 A Capacity (English) 0.08 cu.ft. Certifications/Compliance All units cUL, UL listed; -33 units also CE marked. Depth (English) Interior 9 in. Depth (Metric) Interior 22.8 cm Dimensions (D x W x H) Interior 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5 cm) Dimensions (L x W x H) Exterior 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 16.5 in. Height (English) Interior 3.75 in. Height (Metric) 41.9 cm Height (Metric) Interior 9.5 cm Length (English) 18 in. Length (Metric) 45.7 cm Power Consumption 2230 w Shipping Weight (English) 52 lb. Shipping Weight (Metric) 23.5 kg Temperature Control Digital single setpoint Voltage 240 V Width (English) 4 in. Width (Metric) 27.9 Width (Metric) Interior 10.1 cm Capacity (Metric) 2.2 L Temperature (Metric) 100°C to 1200°C Type Single Setpoint Unit Size EachSku: 1701820240-161
FURNACE 136CI SSP 240V(2230 w) – Available On Request, Prices in Dollars
₦3,437.28 -
Description FURNACE 240V PROG (1560w) FURNACE 240V PROG. Perform ultra-high temperature applications with the Thermo Scientific™ Thermolyne™ Industrial Benchtop Muffle Furnace, which reaches a maximum temperature of 1200°C. Includes multiple safety features and choice of two temperature-control options; additionally, heavy-duty firebrick insulation surrounds the opening for added durability. Key Features: Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Counter-weighted door swings upward, directing heat away from operator Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber Door safety switch protects operator by removing power to the heating elements upon opening the door Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only) Single-setpoint Controller (B1): Single ramp to setpoint and a dwell Single display shows actual temperature or setpoint 8-step Programmable Controller (C1): Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes “Holdback” feature “holds” program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance Includes: Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element. Specifications Amperage 6.5 A Capacity (English) 0.08 cu.ft. Certifications/Compliance All units cUL, UL listed; -33 units also CE marked. Depth (English) Interior 9 in. Depth (Metric) Interior 22.8 cm Dimensions (D x W x H) Interior 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5 cm) Dimensions (L x W x H) Exterior 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 16.5 in. Height (English) Interior 3.75 in. Height (Metric) 41.9 cm Height (Metric) Interior 9.5 cm Length (English) 18 in. Length (Metric) 45.7 cm Power Consumption 1560 w Shipping Weight (English) 52 lb. Shipping Weight (Metric) 23.5 kg Temperature Control Digital programmable 1 program/8 segments Voltage 240 V Width (English) 4 in. Width (Metric) 27.9 Width (Metric) Interior 10.1 cm Capacity (Metric) 2.2 L Temperature (Metric) 100°C to 1200°CSku: 1701820234-160
FURNACE 240V PROG (1560w) – Available On Request, Prices in Dollars
₦3,990.26 -
Description FURNACE 240V PROG (2230 w) FURNACE 240V PROG. Perform ultra-high temperature applications with the Thermo Scientific™ Thermolyne™ Industrial Benchtop Muffle Furnace, which reaches a maximum temperature of 1200°C. Includes multiple safety features and choice of two temperature-control options; additionally, heavy-duty firebrick insulation surrounds the opening for added durability. Key Features: Adjustable Alarm or Overtemperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Counter-weighted door swings upward, directing heat away from operator Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber Door safety switch protects operator by removing power to the heating elements upon opening the door Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F (programmable models only) Single-setpoint Controller (B1): Single ramp to setpoint and a dwell Single display shows actual temperature or setpoint 8-step Programmable Controller (C1): Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes “Holdback” feature “holds” program until furnace temperature heats up or cools down to preprogrammed parameters—program will never outrun furnace performance Includes: Oven, Platinel™ II thermocouple and a ceramic hearth plate to protect the bottom heating element. Specifications Amperage 9.3 A Capacity (English) 0.08 cu.ft. Certifications/Compliance All units cUL, UL listed; -33 units also CE marked. Depth (English) Interior 9 in. Depth (Metric) Interior 22.8 cm Dimensions (D x W x H) Interior 9 x 4 x 3.75 in. (22.8 x 10.1 x 9.5 cm) Dimensions (L x W x H) Exterior 18 x 11 x 16.5 in. (45.7 x 27.9 x 41.9 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 16.5 in. Height (English) Interior 3.75 in. Height (Metric) 41.9 cm Height (Metric) Interior 9.5 cm Length (English) 18 in. Length (Metric) 45.7 cm Power Consumption 2230 w Shipping Weight (English) 52 lb. Shipping Weight (Metric) 23.5 kg Temperature Control Digital programmable 1 program/8 segments Voltage 240 V Width (English) 4 in. Width (Metric) 27.9 Width (Metric) Interior 10.1 cm Capacity (Metric) 2.2 L Temperature (Metric) 100°C to 1200°C Type Unit Size EachSku: 1701820229-159
FURNACE 240V PROG (2230 w) – Available On Request, Prices in Dollars
₦4,071.21 -
Description FURNACE 76CI SSP 240V (CSA approved) Reduce energy consumption and increase heatup time with Thermo Scientific™ Thermolyne™ Benchtop 1100°C Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting gravimetric analysis and for the determination of volatile and suspended solids. Features: available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both sides improves temperature uniformity Drop-down door doubles as a shelf for loading and unloading Door safety switch stops power to heating elements when door is opened Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition 0.95cm (0.38in.) dia. port in chamber rear for monitoring temperatures with independent measuring devices Ordering Information: Accessory heating elements and thermocouples available separately. Includes: Thermocouple, line cord and plug Recommended for: Ashing most types of organic and inorganic samples Heat treating small steel parts Performing ignition tests Conducting gravimetric analysis Determination of volatile and suspended solids Specifications Capacity (English) 0.04 cu.ft. Certifications/Compliance CSA approved Depth (English) Interior 5 in. Depth (Metric) Interior 13 cm Description FB1310M Dimensions (D x W x H) Interior 5 x 4 x 3.8 in. (13 x 10.3 x 9.8 cm) Dimensions (L x W x H) Exterior 13 x 9 x 14 in. (33 x 23 x 36 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 14 in. Height (English) Interior 3.8 in. Height (Metric) 36 cm Height (Metric) Interior 9.8 cm Length (English) 13 in. Length (Metric) 33 cm Power Consumption 1060 w Shipping Weight (English) 20 lb. Shipping Weight (Metric) 9 kg Temperature Stability ±0.3 at 1000°C (±7.8 at 1000°C) Voltage 240 V Width (English) 4 in. Width (Metric) 23 Width (Metric) Interior 10.3 cm Capacity (Metric) 1.3 L Temperature (Metric) 100°C to 1100°C Type Single Setpoint Unit Size EachSku: 1701820218-157
FURNACE 76CI SSP 240V (CSA approved) – Available On Request, Prices in Dollars
₦1,696.00 -
Description FURNACE 76CI SSP 240V (CSA approved, CE marked) Reduce energy consumption and increase heatup time with Thermo Scientific™ Thermolyne™ Benchtop 1100°C Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting gravimetric analysis and for the determination of volatile and suspended solids. Features: available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both sides improves temperature uniformity Drop-down door doubles as a shelf for loading and unloading Door safety switch stops power to heating elements when door is opened Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition 0.95cm (0.38in.) dia. port in chamber rear for monitoring temperatures with independent measuring devices Ordering Information: Accessory heating elements and thermocouples available separately. Includes: Thermocouple, line cord and plug Recommended for: Ashing most types of organic and inorganic samples Heat treating small steel parts Performing ignition tests Conducting gravimetric analysis Determination of volatile and suspended solids Specifications Capacity (English) 0.04 cu.ft. Certifications/Compliance CSA approved, CE marked Depth (English) Interior 5 in. Depth (Metric) Interior 13 cm Description FB1310M-33 Dimensions (D x W x H) Interior 5 x 4 x 3.8 in. (13 x 10.3 x 9.8 cm) Dimensions (L x W x H) Exterior 13 x 9 x 14 in. (33 x 23 x 36 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 14 in. Height (English) Interior 3.8 in. Height (Metric) 36 cm Height (Metric) Interior 9.8 cm Length (English) 13 in. Length (Metric) 33 cm Power Consumption 1060 w Shipping Weight (English) 20 lb. Shipping Weight (Metric) 9 kg Temperature Stability ±0.3 at 1000°C (±7.8 at 1000°C) Voltage 240 V Width (English) 4 in. Width (Metric) 23 Width (Metric) Interior 10.3 cm Capacity (Metric) 1.3 L Temperature (Metric) 100°C to 1100°C Type Single SetpointSku: 1701820223-158
FURNACE 76CI SSP 240V (CSA approved, CE marked) – Available On Request, Prices in Dollars
₦1,865.38 -
Description FURNACE 864CI 4PROG 240V . Digital programmable with 4 programs, 16 segments(CSA approved) Conduct industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis with Thermo Scientific™ Thermolyne™ Premium Large Muffle Furnaces. Key Features Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit Rear of the chamber incorporates a 0.95cm (0.38in.) dia. port for monitoring chamber temperatures with independent measuring devices Optional stainless steel shelf doubles load capacity (maximum temperature of 900°C) Door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Furnaces with B1, C1, and D1 control also use a mechanical overtemperature protection relay Choice of Temperature Controllers Digital single setpoint control (A1): Single display shows actual temperature or setpoint Digital single setpoint control with single ramp to setpoint and a dwell (B1): Single display shows actual temperature or setpoint Digital programmable control with one stored program of eight segments (C1) Digital programmable control with four stored programs, 16 segments per program (D1): Controller includes RS-232 communications Includes: Models F6010 and F6018 include a cord and plug set. Requires: All except Models F6010 and F6018 require a conduit connection. Specifications Amperage 18.3 A Capacity (English) 0.5 cu.ft. Certifications/Compliance CSA approved Depth (English) Interior 10 in. Depth (Metric) Interior 25 cm Description F6030CM Dimensions (D x W x H) Interior 10 x 12.8 x 6.8 in. (25 x 33 x 18 cm) Dimensions (L x W x H) Exterior 20.1 x 19.1 x 21 in. (51 x 48.5 x 53.3 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 21 in. Height (English) Interior 6.8 in. Height (Metric) 53.3 cm Height (Metric) Interior 18 cm Length (English) 20.1 in. Length (Metric) 51 cm Power Consumption 4400 w Shelves Stainless Steel Shipping Weight (English) 134 lb. Shipping Weight (Metric) 60.8 kg Temperature Control Digital programmable with 4 programs, 16 segments Temperature Stability ±0.2 at 1000°C Temperature Uniformity ±2.2 at 1000°C Voltage 240 V Width (English) 19.1 in. Width (Metric) 48.5 cm Width (Metric) Interior 33 cm Capacity (Metric) 14 L Temperature (Metric) 100°C to 1200°C Type Unit Size EachSku: 1701820207-155
FURNACE 864CI 4PROG 240V . Digital programmable with 4 programs, 16 segments(CSA approved) – Available On Request, Prices in Dollars
₦9,108.85 -
Description FURNACE 864CI 4PROG 240V. Digital programmable with 4 programs, 16 segments (CSA approved, CE marked) Conduct industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis with Thermo Scientific™ Thermolyne™ Premium Large Muffle Furnaces. Key Features Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit Rear of the chamber incorporates a 0.95cm (0.38in.) dia. port for monitoring chamber temperatures with independent measuring devices Optional stainless steel shelf doubles load capacity (maximum temperature of 900°C) Door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Furnaces with B1, C1, and D1 control also use a mechanical overtemperature protection relay Choice of Temperature Controllers Digital single setpoint control (A1): Single display shows actual temperature or setpoint Digital single setpoint control with single ramp to setpoint and a dwell (B1): Single display shows actual temperature or setpoint Digital programmable control with one stored program of eight segments (C1) Digital programmable control with four stored programs, 16 segments per program (D1): Controller includes RS-232 communications Includes: Models F6010 and F6018 include a cord and plug set. Requires: All except Models F6010 and F6018 require a conduit connection. Specifications Amperage 18.3 A Capacity (English) 0.5 cu.ft. Certifications/Compliance CSA approved, CE marked Depth (English) Interior 10 in. Depth (Metric) Interior 25 cm Description F6030CM-33 Dimensions (D x W x H) Interior 10 x 12.8 x 6.8 in. (25 x 33 x 18 cm) Dimensions (L x W x H) Exterior 20.1 x 19.1 x 21 in. (51 x 48.5 x 53.3 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 21 in. Height (English) Interior 6.8 in. Height (Metric) 53.3 cm Height (Metric) Interior 18 cm Length (English) 20.1 in. Length (Metric) 51 cm Power Consumption 4400 w Shelves Stainless Steel Shipping Weight (English) 134 lb. Shipping Weight (Metric) 60.8 kg Temperature Control Digital programmable with 4 programs, 16 segments Temperature Stability ±1.5 at 1000°C Temperature Uniformity ±4.5 at 1000°C Voltage 240 V Width (English) 19.1 in. Width (Metric) 48.5 cm Width (Metric) Interior 33 cm Capacity (Metric) 14 L Temperature (Metric) 100°C to 1200°CSku: 1701820213-156
FURNACE 864CI 4PROG 240V . Digital programmable with 4 programs, 16 segments(CSA approved, CE marked) – Available On Request, Prices in Dollars
₦5,955.43 -
Description FURNACE 864CI 8SEG 240V(CSA approved) Conduct industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis with Thermo Scientific™ Thermolyne™ Premium Large Muffle Furnaces. Key Features Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit Rear of the chamber incorporates a 0.95cm (0.38in.) dia. port for monitoring chamber temperatures with independent measuring devices Optional stainless steel shelf doubles load capacity (maximum temperature of 900°C) Door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition Furnaces with B1, C1, and D1 control also use a mechanical overtemperature protection relay Choice of Temperature Controllers Digital single setpoint control (A1): Single display shows actual temperature or setpoint Digital single setpoint control with single ramp to setpoint and a dwell (B1): Single display shows actual temperature or setpoint Digital programmable control with one stored program of eight segments (C1) Digital programmable control with four stored programs, 16 segments per program (D1): Controller includes RS-232 communications Includes: Models F6010 and F6018 include a cord and plug set. Requires: All except Models F6010 and F6018 require a conduit connection. Specifications Amperage 18.3 A Capacity (English) 0.5 cu.ft. Certifications/Compliance CSA approved Depth (English) Interior 10 in. Depth (Metric) Interior 25 cm Description F6020C-80 Dimensions (D x W x H) Interior 10 x 12.8 x 6.8 in. (25 x 33 x 18 cm) Dimensions (L x W x H) Exterior 20.1 x 19.1 x 21 in. (51 x 48.5 x 53.3 cm) Electrical Requirements 240 V 50/60 Hz Frequency 50/60 Hz Height (English) 21 in. Height (English) Interior 6.8 in. Height (Metric) 53.3 cm Height (Metric) Interior 18 cm Length (English) 20.1 in. Length (Metric) 51 cm Power Consumption 4400 w Shelves Stainless Steel Shipping Weight (English) 134 lb. Shipping Weight (Metric) 60.8 kg Temperature Control Digital programmable with 4 programs (C1) Temperature Stability ±1.5 at 1000°C Temperature Uniformity ±4.5 at 1000°C Voltage 240 V Width (English) 19.1 in. Width (Metric) 48.5 cm Width (Metric) Interior 33 cm Capacity (Metric) 14 L Temperature (Metric) 100°C to 1200°C Type MultiprogramSku: 1701820200-154
FURNACE 864CI 8SEG 240V(CSA approved) – Available On Request, Prices in Dollars
₦7,655.46 -
Description FURNACE CERAMIC MUFFLE L9/11/SKM/C550, TMAX.1100 flap door, protective gas connection, hole for thermocouple in furnace door The muffle furnace L 9/11/SKM is particularly recommended for heat treatment of aggressive substances. The furnace has a ceramic muffle with embedded heating from four sides. The muffle furnace thus combines a very good temperature uniformity with excellent protection of the heating elements from aggressive atmospheres. Another aspect is the smooth, nearly particle free muffle (furnace door made of fiber insulation), an important quality feature. Standard Equipment Tmax 1100 °C Muffle heated from four sides Furnace chamber with embedded ceramic muffle, high resistance to aggressive gasses and vapours Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) Optional flap door (L) which can be used as work platform or lift door (LT) with hot surface facing away from the operator Adjustable working air inlet in the door Exhaust air outlet in rear wall of furnace Controller B510 (5 programs with each 4 segments) Solid state relays provide for lownoise operation Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Additional Equipment Chimney, chimney with fan or catalytic converter Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight Manual or automation gas supply system Port for thermocouple in the rear wall or in the furnace door Process control and documentation via VCD software package for monitoring, documentation and control Specification Modell Tmax Inner dimensions in mm Volume Outer dimensions2 in mm Connected Electrical Weight Heating time in °C1 w d h in l W D H load in kW connection* in kg in min4 L 9/11/SKM 1100 230 240 170 9 490 505 580 3.4 1-phase 50 75 LT 9/11/SKM 1100 230 240 170 9 490 505 580+3203 3.4 1-phase 50 75 1Recommended working temperature for processes with longer dwell times is 1000 °C*Please see page 75 for more information about supply voltage 2External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. 3Including opened lift door 4Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE)Sku: 1701820142-143
FURNACE CERAMIC MUFFLE L9/11/SKM/C550, TMAX.1100 – Available On Request, Prices in Dollars
₦9,511.68 -
Description FURNACE CERAMIC MUFFLE LT9/11/SKM/B510, TMAX.1100 lift d lift door, protective gas connection, hole for thermocouple in furnace door The muffle furnace L 9/11/SKM is particularly recommended for heat treatment of aggressive substances. The furnace has a ceramic muffle with embedded heating from four sides. The muffle furnace thus combines a very good temperature uniformity with excellent protection of the heating elements from aggressive atmospheres. Another aspect is the smooth, nearly particle free muffle (furnace door made of fiber insulation), an important quality feature. Standard Equipment Tmax 1100 °C Muffle heated from four sides Furnace chamber with embedded ceramic muffle, high resistance to aggressive gasses and vapours Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) Optional flap door (L) which can be used as work platform or lift door (LT) with hot surface facing away from the operator Adjustable working air inlet in the door Exhaust air outlet in rear wall of furnace Controller B510 (5 programs with each 4 segments) Solid state relays provide for lownoise operation Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Additional Equipment Chimney, chimney with fan or catalytic converter Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight Manual or automation gas supply system Port for thermocouple in the rear wall or in the furnace door Process control and documentation via VCD software package for monitoring, documentation and control Specification Modell Tmax Inner dimensions in mm Volume Outer dimensions2 in mm Connected Electrical Weight Heating time in °C1 w d h in l W D H load in kW connection* in kg in min4 L 9/11/SKM 1100 230 240 170 9 490 505 580 3.4 1-phase 50 75 LT 9/11/SKM 1100 230 240 170 9 490 505 580+3203 3.4 1-phase 50 75 1Recommended working temperature for processes with longer dwell times is 1000 °C*Please see page 75 for more information about supply voltage 2External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. 3Including opened lift door 4Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE)Sku: 1701820085-132
FURNACE CERAMIC MUFFLE LT9/11/SKM/B510, TMAX.1100 – Available On Request, Prices in Dollars
₦8,367.12 -
New
-
NewFurnace chamber 5L Model CWF 1200 CarboliteSku: 1749326991-173
Furnace chamber 5L Model CWF 1200 Carbolite
₦5,265,000.00 -
New
-
Description FURNACE NCAT 240V CE ASPHALT Accommodate larger sample testing and reduce labor and cost with the Thermo Scientific™ NCAT Asphalt Content Furnace, which uses an environmentally friendly, cost-effective ignition method to determine asphalt content by eliminating the cost of solvent and solvent disposal. Cost analysis has shown that the average asphalt producer can pay for the cost of the furnace in as little as 26-32 weeks based on solvent cost-savings alone. Key Features Asphalt content of bituminous paving mixtures is accurate to 0.11% Accommodates samples up to 5000g Operating Features Automatic mode: endpoint is detected and software ends the test, prints the results and beeps until STOP is pressed to unlock door (in accordance with AMRL specifications) Manual mode: endpoint is detected and furnace begins to beep but continues to test until STOP is pressed to unlock door, then and results print Furnace software automatically compensates for weight change due to sample and basket assembly temperature change Compensation is computed for each sample load tested (i.e, a fixed number is not assigned to a given range of load sizes) Positive or negative correction factors are accepted for use with mixes containing hydrated lime Endpoint within 0.01% of the sample weight is automtically detected Sample stability is reached once endpoint criterion is met for three consecutive minutes during the test Endpoint sensitivity is adjustable from 0.01% to 0.5% Software computes test results as calibrated asphalt content per total weight of HMA sample or bitumen ratio per weight of dry aggregate 24-hour/7-day timer can be programmed to preheat furnace RS-232 port provides data interface with a PC for graphical data analysis Savings and Convenience Larger sample testing reduces total samples needed for testing each day, reducing labor and costs Ignition method reduces testing time when compared to solvent extraction: a 1200 to 1800g asphalt sample can be tested in 30 to 45 min. Internal scale monitors sample weight throughout the process, saving technician time and increasing productivity, as samples need not be removed and weighed Standard 30A electrical service is used (50A service costs more to install and operate) Modular design of refractory embedded heating elements provides extended service life and inexpensive, easy replacement Safety No exposure to harmful solvents Automatic door-lock prevents door opening during critical test time, protecting operator and ensuring test integrity High temperature afterburner is used with a proprietary ceramic filter to reduce ignition process emissions by up to 95% Independent laboratory study, conducted with the California Transportation Department in accordance with California EPA guidelines, showed emissions from the furnace during the ignition test were within EPA parameters A laboratory hygiene study, conducted in accordance with OSHA guidelines, proved the system poses no health threats during proper use Compatible with: Accessory start-up kit (AY1087X1) Specifications Accuracy 0.11% Amperage 23 A Analysis Time 30 to 45 min. (1200 to 1800 g sample) Depth (English) Interior 14 in. Depth (Metric) Interior 35.5 cm Dimensions (D x W x H) Interior 14 x 14 x 14 in. (35.5 x 35.5 x 35.5 cm) Dimensions (L x W x H) Exterior 25.75 x 21.75 x 36.75 in. (65.4 x 55.2 x 93.3 cm) Height (English) 36.75 in. Height (English) Interior 14 in. Height (Metric) 93.3 cm Height (Metric) Interior 35.5 cm Length (English) 25.75 in. Length (Metric) 65.4 cm Power Consumption 4800 w Scale Sensitivity Endpoint: 0.01 to 0.5% Shipping Weight (English) 280 lb. Shipping Weight (Metric) 127 kg Voltage 240 V Width (English) 21.75 in. Width (Metric) 55.2 cm Width (Metric) Interior 35.5 cm Temperature (Metric) 200°C to 650°C Type Asphault Content FurnaceSku: 1701820079-131
FURNACE NCAT 240V CE ASPHALT – Available On Request, Prices in Dollars
₦20,410.38 -