“Doppelherz Vitamin D 1000 IU x 45 Tablets” has been added to your basket. Continue shopping
Sort by:
2417–2432 of 4355 Results
Description
Flow-/ consumption meter VA 570-Inline flow meter
Flow-/ consumption meter VA 570 Special measurement technology features:
• 4 values on the display: Flow, total consumption, velocity, tem-perature. Units freely adjustable
• All measured values, settings such as gas type, inner diameter, serial number and so on can be accessed via Modbus-RTU
• Comprehensive diagnostic functions readable on the display or remote access via Modbus such as calibration cycle, error codes, serial number
• Notification in case of exceeding the calibration cycle
• Standard version accuracy 1.5% of m.v. ± 0.3% of f.s.
• Precision version accuracy 1.0% of m.v. ± 0.3% of f.s
• Measuring span of 1 : 1000 (0.1 up to 224 m/s)
• Configuration and diagnosis via display, hand-held device PI 500, PC service software on-site
• Gas type (air, nitrogen, oxygen, argon and so on) freely adjust-able via PC service software or external device DS 400, DS 500, PI 500
• Reference conditions °C and mbar/hPa freely adjustable
• Zero-point adjustment, leak flow volume suppression
• Pressure loss negligible
Flow-/ consumption meter VA 570 Special mechanical features:
• Robust impact-proof aluminium die cast housing for the outdoor area IP 67
• All wetted parts made from stainless steel 1.4571
• On request with DVGW approval for natural gas (up to 16 bar)
• Pressure range up to 16 bar, special version up to 40 bar
• Temperature range up to 180 °C
• No moveable parts, no wear
• Sensor tip very robust, easy to clean
• Housing rotatable, display rotatable by 180°
Description
Flow-Through Conductivity Cells/TetraCon® DU/T
Four electrode plastic flow-through measuring cells with low-polarization graphite electrodes for applications in closed circuits
Suitable for flow-through measurement in the lab
For medium and high conductivity
Also to test special systems
Flow measuring cells by WTW for medium and high conductivity are suitable for extensive measuring series in the lab but also for the maintenance and measurement of cleaning solutions in special systems.
Technical Data
TetraCon® DU/T, TetraCon® DU/TH
Measuring range
1 µS/cm … 1 S/cm
Temperature range
0 … 60 °
Description
Flow-Through Conductivity Cells/TetraCon® DU/TH
Four electrode plastic flow-through measuring cells with low-polarization graphite electrodes for applications in closed circuits
Suitable for flow-through measurement in the lab
For medium and high conductivity
Also to test special systems
Flow measuring cells by WTW for medium and high conductivity are suitable for extensive measuring series in the lab but also for the maintenance and measurement of cleaning solutions in special systems.
Technical Data
TetraCon® DU/T, TetraCon® DU/TH
Measuring range
1 µS/cm … 1 S/cm
Temperature range
0 … 60 °
Description
Product Description
Features
Fit a Wide Range of Tubing Diameters – 1/4″ to 1/2″
Flow – No Flow
Non – Intrusive-Senses right through tubing
Mounting Bracket
All Plastic Design
Simple to Install
Tube Thickness – Heavy Walled Low Voltage
Light weight
Very Accurate
Perfect for Dosing Pumps – Metering Will
Description
Flowmeter, 0.6-5 litres/min
(requires flowmeter stand 100890B)
Casella Flowmeter – 0.6 to 5 litres/min, requires P109028 when used with an inhalable head.
Description
FLUE GAS TESTERS
O2/CO IN FLUE GAS
DESCRIPTION AND APPLICATION (Oxygen/CO (Flue gas temp. optional) )
Suitable for O2, CO measurement in flue gas from combustion appliances
Temperature measurement as an option
Not affected by CO2 within flue gas
Easy to read with big display
Failures, low flow alarm, battery capacity shown on display
Data logger function
.
SPECIFICATIONS
Model
MX-611H
Measuring Gas
Oxygen
Carbon monoxide
Flue gas temp. (optional)
Measuring Principle
Galvanic cell
Chronoamperometry
Thermocouple
Sampling method
Suction type Approx.0.6L/min (at room temperature with gas sampling probe)
Measuring Range
0.0 – 25.0vol%
0 – 5,000ppm
0 – 750°C
Resolution
0.1vol%
1ppm
1°C
Indication accuracy
±0.5vol%
0-200ppm;±20ppm of indication value
201-5,000ppm;±10% of indication value
±5°C
Alarm accuracy
±0.5vol%
0-200ppm;±20ppm of indication value
201-5,000ppm;±10% of indication value
±5°C
Display
Digital liquid crystal
Alarm Method
LED lamp, LCD display and buzzer
Response Time
Within 15 seconds at 90% response
Within 15 seconds at 90% response
–
Power Supply
3 x size AA Alkaline dry battery(LR6)
Continuous Operating time
Approx. 20 hours, no alarm
Operating Temperature Range
-10-40°C; 30-85%RH (non-condensing)
Main body dimensions
78(W) x 200(H) x 50(D)mm
Main body weight
Approx. 550g (including batteries)
Standard accessories
Gas sampling probe with NOx filter, dust filter, carrying case
Description
FLUE GAS TESTERS
CO IN FLUE GAS
DESCRIPTION AND APPLICATION
.
SPECIFICATIONS
Model
TX-611H
Measuring Gas
Carbon monoxide
Measuring Principle
Chronoamperometry
Sampling method
Suction type Approx.0.6L/min (at room temperature with gas sampling probe)
Measuring Range
0 – 5,000ppm
Resolution
1ppm
Indication accuracy
0-200ppm;±20ppm of indication value
201-5,000ppm;±10% of indication value
Display
Digital liquid crystal
Alarm Method
LED lamp, LCD display and buzzer
Response Time
Within 15 seconds at 90% response
–
Power Supply
3 x size AA Alkaline dry battery(LR6)
Continuous Operating time
Approx. 20 hours, no alarm
Operating Temperature Range
-10-40°C; 30-85%RH (non-condensing)
Main body dimensions
78(W) x 200(H) x 50(D)mm
Main body weight
Approx. 550g (including batteries)
Standard accessories
Gas sampling probe with NOx filter, nozzle with hood, key shaped nozzle, dust filter, carrying case
Description
FLUE GAS TESTERS
O2 IN FLUE GAS
Analogue meter with 2 ranges switch.
T To measure the concentration of Oxygen in flue gas from
combustion appliances.
SPECIFICATION
Model
OM-350
Measuring Gas
Oxygen in flue gas
Measuring Principle
Galvanic cell
Sampling method
Suction type Approx.0.7L/min (Non load)
Measuring Range
0.0 – 25.0vol%
Resolution
0.5vol%
Detectable accuracy
±0.7vol%
Display
Analogue (range switch)
Response Time
Within 20 seconds at 90% response from sampling gas inlet at 20°C
–
Continuous Operating time
Approx. 10 hours
Operating Temperature Range
0-40°C;
Main body dimensions
80(W) x 215(H) x 80(D)mm
Main body weight
Approx. 730g (including batteries)
Standard accessories
Water stopper, Gas sampling tube (1.5m), probe, carrying case
PSOROLIN OIL 100 ML ₦4,537.50
Doppelherz Vitamin D 1000 IU x 45 Tablets ₦11,448.00
Description Flow-/ consumption meter VA 570-Inline flow meter Flow-/ consumption meter VA 570 Special measurement technology features: • 4 values on the display: Flow, total consumption, velocity, tem-perature. Units freely adjustable • All measured values, settings such as gas type, inner diameter, serial number and so on can be accessed via Modbus-RTU • Comprehensive diagnostic functions readable on the display or remote access via Modbus such as calibration cycle, error codes, serial number • Notification in case of exceeding the calibration cycle • Standard version accuracy 1.5% of m.v. ± 0.3% of f.s. • Precision version accuracy 1.0% of m.v. ± 0.3% of f.s • Measuring span of 1 : 1000 (0.1 up to 224 m/s) • Configuration and diagnosis via display, hand-held device PI 500, PC service software on-site • Gas type (air, nitrogen, oxygen, argon and so on) freely adjust-able via PC service software or external device DS 400, DS 500, PI 500 • Reference conditions °C and mbar/hPa freely adjustable • Zero-point adjustment, leak flow volume suppression • Pressure loss negligible Flow-/ consumption meter VA 570 Special mechanical features: • Robust impact-proof aluminium die cast housing for the outdoor area IP 67 • All wetted parts made from stainless steel 1.4571 • On request with DVGW approval for natural gas (up to 16 bar) • Pressure range up to 16 bar, special version up to 40 bar • Temperature range up to 180 °C • No moveable parts, no wear • Sensor tip very robust, easy to clean • Housing rotatable, display rotatable by 180°
Description Flow-Through Conductivity Cells/TetraCon® DU/T Four electrode plastic flow-through measuring cells with low-polarization graphite electrodes for applications in closed circuits Suitable for flow-through measurement in the lab For medium and high conductivity Also to test special systems Flow measuring cells by WTW for medium and high conductivity are suitable for extensive measuring series in the lab but also for the maintenance and measurement of cleaning solutions in special systems. Technical Data TetraCon® DU/T, TetraCon® DU/TH Measuring range 1 µS/cm … 1 S/cm Temperature range 0 … 60 °
Description Product Description Features Fit a Wide Range of Tubing Diameters – 1/4″ to 1/2″ Flow – No Flow Non – Intrusive-Senses right through tubing Mounting Bracket All Plastic Design Simple to Install Tube Thickness – Heavy Walled Low Voltage Light weight Very Accurate Perfect for Dosing Pumps – Metering Will
Description Flowmeter 10-100cc/min 2” scale This flowmeter (10-100cc/min 2” scale) from Casella is an air sampling accessory (needs P111018 adaptor).
Description FLUE GAS TESTERS O2/CO IN FLUE GAS DESCRIPTION AND APPLICATION (Oxygen/CO (Flue gas temp. optional) ) Suitable for O2, CO measurement in flue gas from combustion appliances Temperature measurement as an option Not affected by CO2 within flue gas Easy to read with big display Failures, low flow alarm, battery capacity shown on display Data logger function . SPECIFICATIONS Model MX-611H Measuring Gas Oxygen Carbon monoxide Flue gas temp. (optional) Measuring Principle Galvanic cell Chronoamperometry Thermocouple Sampling method Suction type Approx.0.6L/min (at room temperature with gas sampling probe) Measuring Range 0.0 – 25.0vol% 0 – 5,000ppm 0 – 750°C Resolution 0.1vol% 1ppm 1°C Indication accuracy ±0.5vol% 0-200ppm;±20ppm of indication value 201-5,000ppm;±10% of indication value ±5°C Alarm accuracy ±0.5vol% 0-200ppm;±20ppm of indication value 201-5,000ppm;±10% of indication value ±5°C Display Digital liquid crystal Alarm Method LED lamp, LCD display and buzzer Response Time Within 15 seconds at 90% response Within 15 seconds at 90% response – Power Supply 3 x size AA Alkaline dry battery(LR6) Continuous Operating time Approx. 20 hours, no alarm Operating Temperature Range -10-40°C; 30-85%RH (non-condensing) Main body dimensions 78(W) x 200(H) x 50(D)mm Main body weight Approx. 550g (including batteries) Standard accessories Gas sampling probe with NOx filter, dust filter, carrying case
Description FLUE GAS TESTERS CO IN FLUE GAS DESCRIPTION AND APPLICATION . SPECIFICATIONS Model TX-611H Measuring Gas Carbon monoxide Measuring Principle Chronoamperometry Sampling method Suction type Approx.0.6L/min (at room temperature with gas sampling probe) Measuring Range 0 – 5,000ppm Resolution 1ppm Indication accuracy 0-200ppm;±20ppm of indication value 201-5,000ppm;±10% of indication value Display Digital liquid crystal Alarm Method LED lamp, LCD display and buzzer Response Time Within 15 seconds at 90% response – Power Supply 3 x size AA Alkaline dry battery(LR6) Continuous Operating time Approx. 20 hours, no alarm Operating Temperature Range -10-40°C; 30-85%RH (non-condensing) Main body dimensions 78(W) x 200(H) x 50(D)mm Main body weight Approx. 550g (including batteries) Standard accessories Gas sampling probe with NOx filter, nozzle with hood, key shaped nozzle, dust filter, carrying case
Description FLUE GAS TESTERS O2 IN FLUE GAS Analogue meter with 2 ranges switch. T To measure the concentration of Oxygen in flue gas from combustion appliances. SPECIFICATION Model OM-350 Measuring Gas Oxygen in flue gas Measuring Principle Galvanic cell Sampling method Suction type Approx.0.7L/min (Non load) Measuring Range 0.0 – 25.0vol% Resolution 0.5vol% Detectable accuracy ±0.7vol% Display Analogue (range switch) Response Time Within 20 seconds at 90% response from sampling gas inlet at 20°C – Continuous Operating time Approx. 10 hours Operating Temperature Range 0-40°C; Main body dimensions 80(W) x 215(H) x 80(D)mm Main body weight Approx. 730g (including batteries) Standard accessories Water stopper, Gas sampling tube (1.5m), probe, carrying case
Description FLUE GAS TESTERS O2/CO/NO/CO2 in flue gas