Differential pressure transmitter E2418DP is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of low pressure of air and non-aggressive gases in HVAC applications. RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output can be used to connect the transmitter with additional secondary instruments.
Evikon E2418DP Differential Pressure Transmitter Features
- Ranges from 0...+250 Pa to -10...+10 kPa
- Calibrated and temperature compensated
- 2 x 4-20 mA or 0-10 V analog outputs
- RS485 Modbus RTU digital interface
Digital sensors with serial interfaces
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and reliable measurements.
High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user-defined volume units.
Evikon E2703 Features
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- EIA232 serial interface
- Omnicomm protocol
- Easy installation, stem cuttable to length
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and reliable measurements.
High accuracy and linearity
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user-defined volume units.
Evikon E2704 Fuel Level Sensor with RS485 Interface Transmitter Features
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- EIA485 serial interface
- Modbus ASCII or Omnicomm protocol
E2706 with CAN interface and 0...10 V analog output is the latest addition to the Evikon E2700 family of digital level transmitters, designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and reliable measurements.
The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user-defined volume units.
Evikon E2706 Fuel level sensor with CAN and 0-10 V Transmitter Features
- Accurate, reliable design
- Easy installation
- Stem cuttable to length
- CAN interface, J1939 protocol
- 0-10 V analog output
Evikon E2713 Magnetic Float Level Switch Transmitter Features
- Min, Max, Min+Max or up to five level setpoints
- Full stainless steel construction
- NO, NC or changeover contacts
- M12 connector or cable output
- Water, beverages, oil, diesel level control in tanks
Version code
Description
E2713-11-L1-35
one float, one setpoint (Max or Min) at distance L1 from top
E2713-12-L1-L2
one float, two setpoints Max at distance L1 from top Min at distance L1+L2 from top
E2713-22-L1-L2
two floats, two setpoints Max at distance L1 from top Min at distance L1+L2 from top
E2713-33-L1-L2-L3
three floats, three setpoints First at distance L1 from top Second at distance L1+L2 from top Third at distance L1+L2+L3 from top
E5105 series panel controller is designed for automated control systems in various fields of industry, energy and building automation. The industrial panel controller has a 4.3" touch screen with a built-in Linux operating system. E5105 panel controller can be used as an HMI which features digital interfaces RS232 and RS485 supporting Modbus ASCII/RTU protocols.
Features
HMI panel and PLC in one unit
Graphic touchscreen
Linux operating system
Two independent RS232/RS485 interfaces
It is not allowed to use a 24V distribution grid for power supply. An independent power supply unit must be used
E5110 series panel controller is designed for automated control systems in various fields of industry, energy and building automation. The industrial panel controller has a 10" touch screen with a built-in Linux operating system. E5110 panel controller can be used as an HMI which features digital interfaces RS232 and RS485 supporting Modbus ASCII/RTU protocols.
Features
HMI panel and PLC in one unit
Graphic touchscreen
Two independent RS232/RS485 interfaces
Linux operating system
It is not allowed to use a 24V distribution grid for power supply. An independent power supply unit must be used.
Model E6202 two-channel controller process regulator is designed for measurement and regulation of temperature, humidity, pressure or other parameters. The controller has an RS485 interface supporting Modbus ASCII or RTU protocol.
Evikon E6202 Two-channel controller process regulator Features
- Two universal inputs
- On-Off or proportional control
- Two 4-digit LED displays
- RS485 Modbus ASCII/RTU
Model E6212 PID controller with two universal inputs is designed for measurement and regulation of temperature, pressure, humidity, weight or other parameters. The controller has RS485 digital interface with Modbus ASCII/RTU communication protocols supporting baud-rates up to 115,2 kbit/s. Thanks to a special control mode, the E6212 controller enables one to reach a predetermined set point in the shortest time with minimum external load disturbance.
Evikon E6212 Two-channel PID controller Features
- Two universal inputs
- On-Off or PID control
- Control output for 3-way valve
- Two 4-digit LED displays
- RS485 Modbus ASCII/RTU
Model E6500 is a 1/8 DIN size panel mount controller, designed for accurate temperature measurement and regulation in a large variety of applications and industries. Universal input supports Pt50, Pt100, Pt500, Pt1000, Ni500 and Ni1000 RTD sensors in two, three or four-wire circuit, or thermocouple types B, J, K, N, R, S or T with internal cold junction compensation. The controller features an enlarged dual LED display, three outputs, On/Off or PID control modes with fast autotuning to reach a setpoint in the shortest time with minimum disturbance.
Evikon E6500 Temperature controller Features
- Dual LED display, large 20-mm main digits
- Universal input for RTDs and thermocouples
- Two SPST relays and SSR control output
- ON-OFF or PID regulation, digital filter
Evikon ET4xx-S011 family of long stem thermometers is designed for temperature measurement at several meters depth in fuel oil tanks, peat or compost pits and other similar applications.
Thermometer versions
Evikon ET432-S011 stem length L = 2 m, round tip, weight 500 g
Evikon ET433-S011 stem length L = 3 m, round tip, weight 700 g
Evikon ET452-S011 stem length L = 2 m, sharp tip, handle, weight 700 g
Evikon ET453-S011 stem length L = 3 m, sharp tip, handle, weight 950 g
Features
Measurement at 2 or 3 m depth
Excellent accuracy and reliability
Compact lightweight housing, detachable probes
Large LCD display, the optional logging function
Dust-proof IP67 protected design, no moving parts
Loyfer XT Tablet 10?S ₦30,600.00
P RD STRIP OF 15 CAPSULES ₦1,340.75
Zetaton Plus Zetabiol 12x10ml ₦12,198.00
BILAHIST 20MG TAB 10`S ₦2,557.50
PANLIPASE 25000 CAPSULE 10?S ₦13,922.00
CCQ 50MG TAB 5`S ₦5,789.75
BIOVIT XT TAB 10`S ₦3,712.50
Differential pressure transmitter E2418DP is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of low pressure of air and non-aggressive gases in HVAC applications. RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output can be used to connect the transmitter with additional secondary instruments. Evikon E2418DP Differential Pressure Transmitter Features - Ranges from 0...+250 Pa to -10...+10 kPa - Calibrated and temperature compensated - 2 x 4-20 mA or 0-10 V analog outputs - RS485 Modbus RTU digital interface
Digital sensors with serial interfaces Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and reliable measurements. High accuracy and linearity The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user-defined volume units. Evikon E2703 Features - Accurate, reliable design - Easy installation - Stem cuttable to length - EIA232 serial interface - Omnicomm protocol - Easy installation, stem cuttable to length
Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and reliable measurements. High accuracy and linearity The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user-defined volume units. Evikon E2704 Fuel Level Sensor with RS485 Interface Transmitter Features - Accurate, reliable design - Easy installation - Stem cuttable to length - EIA485 serial interface - Modbus ASCII or Omnicomm protocol
E2706 with CAN interface and 0...10 V analog output is the latest addition to the Evikon E2700 family of digital level transmitters, designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and reliable measurements. The resolution is better than 0.1% of the range, typically 0.07 mm. Thus high accuracy is provided even in low profile tanks. Thanks to two adjustable digital integrating filters short term fuel level fluctuations do not affect the sensor output. The internal 32-point calibration system enables highly linear output in user-defined volume units. Evikon E2706 Fuel level sensor with CAN and 0-10 V Transmitter Features - Accurate, reliable design - Easy installation - Stem cuttable to length - CAN interface, J1939 protocol - 0-10 V analog output
Evikon E2713 Magnetic Float Level Switch Transmitter Features - Min, Max, Min+Max or up to five level setpoints - Full stainless steel construction - NO, NC or changeover contacts - M12 connector or cable output - Water, beverages, oil, diesel level control in tanks Version code Description E2713-11-L1-35 one float, one setpoint (Max or Min) at distance L1 from top E2713-12-L1-L2 one float, two setpoints Max at distance L1 from top Min at distance L1+L2 from top E2713-22-L1-L2 two floats, two setpoints Max at distance L1 from top Min at distance L1+L2 from top E2713-33-L1-L2-L3 three floats, three setpoints First at distance L1 from top Second at distance L1+L2 from top Third at distance L1+L2+L3 from top
E5105 series panel controller is designed for automated control systems in various fields of industry, energy and building automation. The industrial panel controller has a 4.3" touch screen with a built-in Linux operating system. E5105 panel controller can be used as an HMI which features digital interfaces RS232 and RS485 supporting Modbus ASCII/RTU protocols. Features HMI panel and PLC in one unit Graphic touchscreen Linux operating system Two independent RS232/RS485 interfaces It is not allowed to use a 24V distribution grid for power supply. An independent power supply unit must be used
E5110 series panel controller is designed for automated control systems in various fields of industry, energy and building automation. The industrial panel controller has a 10" touch screen with a built-in Linux operating system. E5110 panel controller can be used as an HMI which features digital interfaces RS232 and RS485 supporting Modbus ASCII/RTU protocols. Features HMI panel and PLC in one unit Graphic touchscreen Two independent RS232/RS485 interfaces Linux operating system It is not allowed to use a 24V distribution grid for power supply. An independent power supply unit must be used.
Model E6202 two-channel controller process regulator is designed for measurement and regulation of temperature, humidity, pressure or other parameters. The controller has an RS485 interface supporting Modbus ASCII or RTU protocol. Evikon E6202 Two-channel controller process regulator Features - Two universal inputs - On-Off or proportional control - Two 4-digit LED displays - RS485 Modbus ASCII/RTU
Model E6212 PID controller with two universal inputs is designed for measurement and regulation of temperature, pressure, humidity, weight or other parameters. The controller has RS485 digital interface with Modbus ASCII/RTU communication protocols supporting baud-rates up to 115,2 kbit/s. Thanks to a special control mode, the E6212 controller enables one to reach a predetermined set point in the shortest time with minimum external load disturbance. Evikon E6212 Two-channel PID controller Features - Two universal inputs - On-Off or PID control - Control output for 3-way valve - Two 4-digit LED displays - RS485 Modbus ASCII/RTU
Model E6500 is a 1/8 DIN size panel mount controller, designed for accurate temperature measurement and regulation in a large variety of applications and industries. Universal input supports Pt50, Pt100, Pt500, Pt1000, Ni500 and Ni1000 RTD sensors in two, three or four-wire circuit, or thermocouple types B, J, K, N, R, S or T with internal cold junction compensation. The controller features an enlarged dual LED display, three outputs, On/Off or PID control modes with fast autotuning to reach a setpoint in the shortest time with minimum disturbance. Evikon E6500 Temperature controller Features - Dual LED display, large 20-mm main digits - Universal input for RTDs and thermocouples - Two SPST relays and SSR control output - ON-OFF or PID regulation, digital filter
Evikon ET4xx-S011 family of long stem thermometers is designed for temperature measurement at several meters depth in fuel oil tanks, peat or compost pits and other similar applications. Thermometer versions Evikon ET432-S011 stem length L = 2 m, round tip, weight 500 g Evikon ET433-S011 stem length L = 3 m, round tip, weight 700 g Evikon ET452-S011 stem length L = 2 m, sharp tip, handle, weight 700 g Evikon ET453-S011 stem length L = 3 m, sharp tip, handle, weight 950 g Features Measurement at 2 or 3 m depth Excellent accuracy and reliability Compact lightweight housing, detachable probes Large LCD display, the optional logging function Dust-proof IP67 protected design, no moving parts
Name: TELESCOPE Brand: UNBRANDED Part Number: F1000114EQ Description: EQUATORIAL REFLECTOR TELESCOPE Size: 1000 MM (FOCAL LENGHT) Category: INDUSTRIAL INSTRUMENT Class: SCOPES Range: TELESCOPE Condition: NEW
Name: SOCKET SET Brand: FACOM Part Number: NIL Description: 17PC 12POINT INCH SOCKET SET Size: 15/16?-21/4?*3/4?DRIVE. Category: HAND TOOLS Class: FASTENING & LOOSENING Range: SOCKETS & ACCESSORIES Condition: NEW (STOCK EFFECT)