“GLYCINORM OD 60MG STRIP OF 15 TABLETS” has been added to your basket. Continue shopping
Sort by:
1–16 of 22 Results
One set fit most: 6PCS 20cm/7.9inch different volumes(0.5ml 1ml,2ml,3ml,5ml,10ml)thick glass graduated dropper pipettes with silicone tops,perfert for your various needs! High quality:Pipettes are made of borosilicate glass,thick and durable. Environmental and reusable:Come with brushes,the glass pipettes are environmental friendly and non-toxicIt is also reusable after clean up,and better than plastic pipette. Clear reading line:Graduation is very precise, clear and professional, the calibration marks are easily readable. Multiple using ways:Large reservoir for receiving and dispensing liquids.Apply for testing laboratories, chemistry, microbiology, liquids, scents and more.
☑ Package Included - 2 x 10ml + 2 x 5ml pipette dropper with Big Cap. ☑ High Quality - Pipettes are made of glass+Rubber, non-toxic and odorless, thick and durable. ☑ Eco-friendly and Reusable -The dropper is made of glass with corrosion resistance and also reusable. Can be used again after being cleaned up. ☑ Multiple Use -Perfect for receiving and dispensing liquids.Apply for testing laboratories, chemistry, microbiology, liquids, scents etc. ☑ NOTE - If transport damaged, please contact us for a FREE REPLACEMENT. When adding the liquid, the dropper is just above the vertical. After drawing the liquid, the tip can not touch other objects, so as to avoid contamination of impurities.
Droppers 10ml Pipettes Glass Graduated Dropper Lab Pipette Liquid Pipette (6)Package contains: 6pcs 10ml glass graduated dropper + 6 large rubber caps+1 pcs 10ml dropper brush +2 pcs 20cm glass stir rod. Product specifications: dropper length - 20cm/7.9 inch, rubber cap length 6cm/2.4 inch. Blue suction ball: made of high quality rubber, non-toxic and odorless. Glass droppers with high quality: the dropper is made of lead-free glass with corrosion resistance. Clear reading lines on the pipettes' wall: Number from 1-10 from mouth to head. Glass wall is printed with clear and precise scale, easy for you to measure the liquid.
About this item FILTER IN SECONDS: Filtration can be a pain, taking hours using gravity alone. Our lab vacuum pump, which works at 10L/min, can accomplish the same job in seconds - even with highly viscous liquids. The vacuum pump can save hours in the lab and let you run more experiments - or produce more product. NO NEED FOR OIL: The Fristaden Lab vacuum pump uses a powerful, 0.75Mpa oilless small diaphragm pump, which means it isn’t messy and doesn’t need regular maintenance. The pump can pull a vacuum strong enough for most lab or industrial work. AS QUIET AS A LIBRARY: The innovative lab vacuum filtration pump runs at only 40 decibels, the sound level in a library. SMALL, LAB-QUALITY PUMP: The small vacuum pump is small and easy to store when not in use. It is built with sturdy lab-quality materials meant to last for years. The oilless design also guarantees that oil from the pump won’t contaminate your work - a risk in many pumps. ONE YEAR WARRANTY: The Fristaden Lab Vacuum Pump has a one year warranty, including parts.
About this item Flasks: 5 Sizes - 50, 150, 250, 500, 1000ml Glass Stirring Rods - 3 sizes - 6", 8", and 10", diameter is 6mm Magnetic Stir Bars - 3 sizes - 12x7, 25x7, and 35x9, PTFE, Pivot Ring, White Cleaning Brush: Color is Random (Cyan, Red, Gray, Blue, or Orange), Heavy Duty, 12.5", Silicon coated Steel Rod High quality inert 3.3 borosilicate glass. ASTM Specification E960, Type I requirements
IVYX Scientific Multi-Volume Adjustable Micropipette/Pipettor 100-1000 μlHIGHLY ACCURATE: Calibrated in accordance with ISO 8655 for precision and accuracy. Each pipette supplied with an individual test certificate. The quality control involves gravimetric testing of each pipette with distilled water at 22°C. Maximum permissible systematic error (Inaccuracy): at 100μL : 2μL; at 500μL : 3.5μL; at 1000μL : 6μL. Maximum permissible random error (Imprecision): at 100μL : 0.7μL; at 500μL : 1.25μL; at 1000μL : 2μL EASY TO READ AND USE: Digital display clearly reads volume setting from 100 to 1000 μL in increments of 5 μL. Ergonomic design and lightweight prevents repetitive strain injuries. The piston button is easily rotated to select the desired volume. Tip ejector makes easy and quick tip change. UNIVERSAL SIZED TIPS: Accepts all universal sized tips, so you don't have to spend a fortune for proprietary tips. DURABLE: The tip cone is made of PVDF (Polyvinylidene difluoride), which provides excellent resistance to solvents, acids and bases. Low operation force. Smooth thumb pump action and smooth aspiration of various liquid. Easy to maintain and calibrate with the tools and silicone grease supplied. AUTOCLAVABLE: The tip core can be sterilized by autoclave, for 20 mins at 121°C.
Hematology, bacteriology, and general laboratory applications These economical pipettes feature straight cut tips and smooth High-quality borosilicate glass, plain or cotton-plugged 4" Body Length
Featuring ergonomic design and intuitive operating concept, Labasics Single Channel Pipettor is ideal for liquid handling application with high accuracy Volume range: 1000 - 5000 µL; volume setting is continuously adjustable by turning thumb wheel with a clear digital indicator for easier volume identification Detachable and replaceable tip cone supports liquid handling application within 20°C - 25°C (± 5°C) Easy to recalibration if needed; included color caps for conveniently mark different uses of pipettes in lab Warranty: Labasics 1-year limited warranty; if received damaged, please contact us immediately; we will solve it until satisfied
A pharmaceutical centrifuge is a specialized laboratory instrument used in the pharmaceutical industry to separate and purify components of a mixture based on their density using centrifugal force. Centrifugation is a widely used technique in pharmaceutical research, development, and production processes, where it plays a crucial role in various applications such as drug discovery, formulation, quality control, and bioprocessing.Key features and applications of a pharmaceutical centrifuge may include:
Separation of Solids and Liquids: Pharmaceutical centrifuges are used to separate solids from liquids or to separate two immiscible liquids with different densities.
Cell and Tissue Culture: In bioprocessing and cell culture applications, centrifuges are used to harvest cells, separate cellular components, and concentrate biomolecules.
Quality Control: Pharmaceutical companies use centrifuges to analyze the quality and consistency of products, such as testing the sedimentation rate of suspensions or detecting impurities.
Drug Development: Centrifuges are utilized during drug development to perform pharmacokinetic studies, where drug compounds are separated from biological matrices like plasma or serum.
Formulation Studies: Centrifugation is used to study the stability and compatibility of drug formulations, ensuring that they remain effective and safe over time.
Vaccine Production: Centrifuges play a crucial role in the production of vaccines, helping to isolate and purify viral components or proteins.
Different Types: Pharmaceutical centrifuges come in various types, including benchtop centrifuges, floor-standing centrifuges, and high-speed ultracentrifuges. The choice of centrifuge depends on the specific application and required performance.
Temperature Control: Some centrifuges offer temperature control features, allowing researchers to conduct temperature-sensitive experiments.
High G-Force Capabilities: Depending on the application, pharmaceutical centrifuges may need to reach high speeds and generate high g-forces to effectively separate components.
Automation and Safety Features: Advanced centrifuges may have automation capabilities, user-friendly interfaces, and safety features like lid locks and imbalance detection systems.
It's important to note that pharmaceutical centrifuges must adhere to strict regulatory requirements, such as Good Manufacturing Practices (GMP), to ensure the quality and safety of pharmaceutical products. Regular maintenance, calibration, and proper usage are crucial to ensure accurate and reliable results.Overall, pharmaceutical centrifuges are indispensable tools in pharmaceutical research and production, enabling scientists and researchers to efficiently separate and analyze various components, leading to advancements in drug development and pharmaceutical sciences.
DESIGN----This is a two-piece design vacuum cold trap,the connections on the uppper parts are with serrated hose connection,The center tube with 10mm hose connections for easy connection to a vacuum gas manifold bank tubes which are also with 10mm hose connections.The serration hose connection on the side tube have an O.D.of 13mm at the smallest serration and 16mm at the largest serration. The lower part is a thick wall round bottom tube with standard taper outer joint. USE----It is used to place between the experimental apparatus and the vacuum source. In a schlenk line,the vacuum trap is usually connected to the vacuum bank of the vacuum gas manifold DIMENSIONS-----This vacuum trap has 24/40 joints to assemble the two parts together, The O.D of the outer body is 30mm,the outer body below the joint is 200mm,the O.D.of the inner and side tube is 10mm. HEAVY WALL ---This lab glassware is heavy-wall designed , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling,durable and reusable. 100% 90 DAY MONEY BACK GUARANTEE If you are not satisfied for any reason, simply return for a full refund, no questions asked. You have nothing to lose.Please also kindly understand glassware is fragile, even if we pack them carefully,it may be broken during the shipment ,if you receive the items in broken status,don't hesitate to contact us ,we will arrange free replacement or full refund.
【Reliable Quality】Glass alcohol lamp burner is made of thick transparent glass, which is environmentally friendly, non-toxic and safe to use. 【Metal Cap】The classic bunsen burner set is equipped with a metal cap to extinguish the flame and prevent the alcohol from evaporating. Lightly press with the metal cap to extinguish the flame. 【Large Capacity】150ml large-capacity alcohol lamp, burns longer and reduces the frequency of adding alcohol. 【Extra Long Wick】The new generation alcohol lamp has an extra-long wick for you to use, which can be cut to any length. 【Meet Multiple Needs】The glass alcohol burner is ideal for scientific experiments or teaching that require low heat sources.
[PROFESSIONAL LABORATORY SUPPLIER] - Mxmoonfree promises a 1-YEAR warranty. We will repeatedly test before leaving the factory to ensure they are laboratory-grade quality. If you have any questions or needs, we are honored to provide you with effective support. [SECURITY DESIGN] - Equipped with two valves. When device overpressure, the safety valve would automatically deflated without worrying about explosion. [EASY OPERATION] - In just 5 steps you can get a safe and healthy environment. The high temperature steam autoclave can use flame or electricity elicit the same effect. [EFFICIENT] - With fast heating, this portable autoclave can reach high temperatures. Steam can kill 99.99% of lives within 15 minutes at 121 degrees Celsius. [PARAMETER] - Capacity of this steam autoclave is 5.4 L (9.4-in diameter and 4.7-in high). It’s working temperature is 121-126 degrees Celsius (250~259°F) and working pressure is 0.10~0.14MPa (15~20 psi).
ONiLAB Lab Micropipette, Adjustable Volume Single Channel Pipettors,20-200ulVolume Range: 20-200μl; Increment: 1μl Digit display for accurate volume setting and large window for easy volume identification Ultra-light and ergonomic design allows for soft range adjustment and piston movement offering fatigue-less pipetting experience Conform to ISO8655 and each pipette calibrated with three-points, calibration certificate included, easy calibration and maintenance The tip cone can be disassembled and autoclaved in 121 degree, 1 Year Warranty
About this item This is a package of pre-cleaned 72 piece microscope blank slides and 100 piece 22mmx22mm square cover slips Glass blank slides: 1" x 3" x 0.04" (25.4x76. 2x1mm) Glass cover slips: 7/8 x 7/8 x 0.006 inch Material: optical glass Finished with ground edge
› See more product details
GLYCINORM OD 60MG STRIP OF 15 TABLETS ₦4,405.50
One set fit most: 6PCS 20cm/7.9inch different volumes(0.5ml 1ml,2ml,3ml,5ml,10ml)thick glass graduated dropper pipettes with silicone tops,perfert for your various needs! High quality:Pipettes are made of borosilicate glass,thick and durable. Environmental and reusable:Come with brushes,the glass pipettes are environmental friendly and non-toxicIt is also reusable after clean up,and better than plastic pipette. Clear reading line:Graduation is very precise, clear and professional, the calibration marks are easily readable. Multiple using ways:Large reservoir for receiving and dispensing liquids.Apply for testing laboratories, chemistry, microbiology, liquids, scents and more.
☑ Package Included - 2 x 10ml + 2 x 5ml pipette dropper with Big Cap. ☑ High Quality - Pipettes are made of glass+Rubber, non-toxic and odorless, thick and durable. ☑ Eco-friendly and Reusable -The dropper is made of glass with corrosion resistance and also reusable. Can be used again after being cleaned up. ☑ Multiple Use -Perfect for receiving and dispensing liquids.Apply for testing laboratories, chemistry, microbiology, liquids, scents etc. ☑ NOTE - If transport damaged, please contact us for a FREE REPLACEMENT. When adding the liquid, the dropper is just above the vertical. After drawing the liquid, the tip can not touch other objects, so as to avoid contamination of impurities.
Droppers 10ml Pipettes Glass Graduated Dropper Lab Pipette Liquid Pipette (6)Package contains: 6pcs 10ml glass graduated dropper + 6 large rubber caps+1 pcs 10ml dropper brush +2 pcs 20cm glass stir rod. Product specifications: dropper length - 20cm/7.9 inch, rubber cap length 6cm/2.4 inch. Blue suction ball: made of high quality rubber, non-toxic and odorless. Glass droppers with high quality: the dropper is made of lead-free glass with corrosion resistance. Clear reading lines on the pipettes' wall: Number from 1-10 from mouth to head. Glass wall is printed with clear and precise scale, easy for you to measure the liquid.
About this item FILTER IN SECONDS: Filtration can be a pain, taking hours using gravity alone. Our lab vacuum pump, which works at 10L/min, can accomplish the same job in seconds - even with highly viscous liquids. The vacuum pump can save hours in the lab and let you run more experiments - or produce more product. NO NEED FOR OIL: The Fristaden Lab vacuum pump uses a powerful, 0.75Mpa oilless small diaphragm pump, which means it isn’t messy and doesn’t need regular maintenance. The pump can pull a vacuum strong enough for most lab or industrial work. AS QUIET AS A LIBRARY: The innovative lab vacuum filtration pump runs at only 40 decibels, the sound level in a library. SMALL, LAB-QUALITY PUMP: The small vacuum pump is small and easy to store when not in use. It is built with sturdy lab-quality materials meant to last for years. The oilless design also guarantees that oil from the pump won’t contaminate your work - a risk in many pumps. ONE YEAR WARRANTY: The Fristaden Lab Vacuum Pump has a one year warranty, including parts.
About this item Flasks: 5 Sizes - 50, 150, 250, 500, 1000ml Glass Stirring Rods - 3 sizes - 6", 8", and 10", diameter is 6mm Magnetic Stir Bars - 3 sizes - 12x7, 25x7, and 35x9, PTFE, Pivot Ring, White Cleaning Brush: Color is Random (Cyan, Red, Gray, Blue, or Orange), Heavy Duty, 12.5", Silicon coated Steel Rod High quality inert 3.3 borosilicate glass. ASTM Specification E960, Type I requirements
IVYX Scientific Multi-Volume Adjustable Micropipette/Pipettor 100-1000 μlHIGHLY ACCURATE: Calibrated in accordance with ISO 8655 for precision and accuracy. Each pipette supplied with an individual test certificate. The quality control involves gravimetric testing of each pipette with distilled water at 22°C. Maximum permissible systematic error (Inaccuracy): at 100μL : 2μL; at 500μL : 3.5μL; at 1000μL : 6μL. Maximum permissible random error (Imprecision): at 100μL : 0.7μL; at 500μL : 1.25μL; at 1000μL : 2μL EASY TO READ AND USE: Digital display clearly reads volume setting from 100 to 1000 μL in increments of 5 μL. Ergonomic design and lightweight prevents repetitive strain injuries. The piston button is easily rotated to select the desired volume. Tip ejector makes easy and quick tip change. UNIVERSAL SIZED TIPS: Accepts all universal sized tips, so you don't have to spend a fortune for proprietary tips. DURABLE: The tip cone is made of PVDF (Polyvinylidene difluoride), which provides excellent resistance to solvents, acids and bases. Low operation force. Smooth thumb pump action and smooth aspiration of various liquid. Easy to maintain and calibrate with the tools and silicone grease supplied. AUTOCLAVABLE: The tip core can be sterilized by autoclave, for 20 mins at 121°C.
Hematology, bacteriology, and general laboratory applications These economical pipettes feature straight cut tips and smooth High-quality borosilicate glass, plain or cotton-plugged 4" Body Length
Featuring ergonomic design and intuitive operating concept, Labasics Single Channel Pipettor is ideal for liquid handling application with high accuracy Volume range: 1000 - 5000 µL; volume setting is continuously adjustable by turning thumb wheel with a clear digital indicator for easier volume identification Detachable and replaceable tip cone supports liquid handling application within 20°C - 25°C (± 5°C) Easy to recalibration if needed; included color caps for conveniently mark different uses of pipettes in lab Warranty: Labasics 1-year limited warranty; if received damaged, please contact us immediately; we will solve it until satisfied
A pharmaceutical centrifuge is a specialized laboratory instrument used in the pharmaceutical industry to separate and purify components of a mixture based on their density using centrifugal force. Centrifugation is a widely used technique in pharmaceutical research, development, and production processes, where it plays a crucial role in various applications such as drug discovery, formulation, quality control, and bioprocessing.Key features and applications of a pharmaceutical centrifuge may include:
DESIGN----This is a two-piece design vacuum cold trap,the connections on the uppper parts are with serrated hose connection,The center tube with 10mm hose connections for easy connection to a vacuum gas manifold bank tubes which are also with 10mm hose connections.The serration hose connection on the side tube have an O.D.of 13mm at the smallest serration and 16mm at the largest serration. The lower part is a thick wall round bottom tube with standard taper outer joint. USE----It is used to place between the experimental apparatus and the vacuum source. In a schlenk line,the vacuum trap is usually connected to the vacuum bank of the vacuum gas manifold DIMENSIONS-----This vacuum trap has 24/40 joints to assemble the two parts together, The O.D of the outer body is 30mm,the outer body below the joint is 200mm,the O.D.of the inner and side tube is 10mm. HEAVY WALL ---This lab glassware is heavy-wall designed , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and annealed at 800 degree Celsius ,can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling,durable and reusable. 100% 90 DAY MONEY BACK GUARANTEE If you are not satisfied for any reason, simply return for a full refund, no questions asked. You have nothing to lose.Please also kindly understand glassware is fragile, even if we pack them carefully,it may be broken during the shipment ,if you receive the items in broken status,don't hesitate to contact us ,we will arrange free replacement or full refund.
【Reliable Quality】Glass alcohol lamp burner is made of thick transparent glass, which is environmentally friendly, non-toxic and safe to use. 【Metal Cap】The classic bunsen burner set is equipped with a metal cap to extinguish the flame and prevent the alcohol from evaporating. Lightly press with the metal cap to extinguish the flame. 【Large Capacity】150ml large-capacity alcohol lamp, burns longer and reduces the frequency of adding alcohol. 【Extra Long Wick】The new generation alcohol lamp has an extra-long wick for you to use, which can be cut to any length. 【Meet Multiple Needs】The glass alcohol burner is ideal for scientific experiments or teaching that require low heat sources.
[PROFESSIONAL LABORATORY SUPPLIER] - Mxmoonfree promises a 1-YEAR warranty. We will repeatedly test before leaving the factory to ensure they are laboratory-grade quality. If you have any questions or needs, we are honored to provide you with effective support. [SECURITY DESIGN] - Equipped with two valves. When device overpressure, the safety valve would automatically deflated without worrying about explosion. [EASY OPERATION] - In just 5 steps you can get a safe and healthy environment. The high temperature steam autoclave can use flame or electricity elicit the same effect. [EFFICIENT] - With fast heating, this portable autoclave can reach high temperatures. Steam can kill 99.99% of lives within 15 minutes at 121 degrees Celsius. [PARAMETER] - Capacity of this steam autoclave is 5.4 L (9.4-in diameter and 4.7-in high). It’s working temperature is 121-126 degrees Celsius (250~259°F) and working pressure is 0.10~0.14MPa (15~20 psi).
ONiLAB Lab Micropipette, Adjustable Volume Single Channel Pipettors,20-200ulVolume Range: 20-200μl; Increment: 1μl Digit display for accurate volume setting and large window for easy volume identification Ultra-light and ergonomic design allows for soft range adjustment and piston movement offering fatigue-less pipetting experience Conform to ISO8655 and each pipette calibrated with three-points, calibration certificate included, easy calibration and maintenance The tip cone can be disassembled and autoclaved in 121 degree, 1 Year Warranty
About this item This is a package of pre-cleaned 72 piece microscope blank slides and 100 piece 22mmx22mm square cover slips Glass blank slides: 1" x 3" x 0.04" (25.4x76. 2x1mm) Glass cover slips: 7/8 x 7/8 x 0.006 inch Material: optical glass Finished with ground edge › See more product details
Meets ASTM E-969 Class B Specifications for Tolerance 3.0 mm approximate tip inner diameter 0.10 ml tolerance Country of origin: Taiwan