ASLI Brand Cool And Heating Shock Test Equipment
Cool Thermal Shock Test Equipment is also called hot and cold impact testing machine, hot and cold impact machine, temperature impact test box, used to test the material structure or composite materials, in a moment by very high temperature and very low temperature of the continuous environment some can endure the extent, reflected in the shortest possible time to test its thermal expansion caused by chemical changes or physical damage.
The applicable objects include metals, plastics, rubber, electronic materials, etc., which can be used as the basis or reference for the improvement of their products.
|
Model
|
TS-42(A~C)
|
TS-80(A~C)
|
TS-150(A~C)
|
TS-252(A~C)
|
TS-450(A~C)
|
||||||||||||
|
Internal Dimension
WxHxD ( mm) |
400x350x350
|
500x400x400
|
600x500x500
|
700x600x600
|
800x750x750
|
||||||||||||
|
External Dimension
WxHxD (mm) |
1400x1800x1400
|
1550x1950x1550
|
1600x2000x170
|
1700x2100x1750
|
1800x2200x1900
|
||||||||||||
|
Temperature Range of Testing zone
|
Type A:-40 °C~+150°C
( 200°C is Optional) |
Type B:-55°C ~+150°C
( 200°C is Optional ) |
Type C:-65°C ~+150°C
( 200°C is Optional) |
||||||||||||||
|
High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional);
Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC |
|||||||||||||||||
|
Exposure Time of High/ Low Temperature
|
Exposure Time of High Temperature: +60°C ~ +150°C (200°C is Optional) 30Mins
|
||||||||||||||||
|
Exposure Time of Low Temperature : -10°C~Type A:-40°C / Type B -55°C / Type C -65°C 30Mins
|
|||||||||||||||||
|
Temperature of Heat-Storing Slot / Heating Time
|
RT~200°C/About 45mins
|
||||||||||||||||
|
Temperature of Cool-storing Slot / Cooling Time
|
RT~-75°C/ About 100mins
|
||||||||||||||||
|
Temperature Recovery Time / Conversion Time
|
≤5min/≤5sec
|
||||||||||||||||
|
Control Accuracy / Distribution Uniformity
|
±0.5°C/±2°C
|
||||||||||||||||
|
Internal and External Material
|
Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or SEE cold-rolled steel with paint coated.
|
||||||||||||||||
|
Insulation Material
|
High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials
|
||||||||||||||||
|
Mechanics
|
P.I.D+S.S.R+ Micro-computer balanced temperature control system
|
||||||||||||||||
|
Cooling System
|
Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)
|
||||||||||||||||
|
Security Protection Devices
|
Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator
high-pressure protective switch , failure warning system, electronic alarm |
||||||||||||||||
|
Accessories
|
viewing window(special order)
|
||||||||||||||||
|
Compressor
|
French ‘Tecumseh’ Brand, Germany Bizer Brand
|
||||||||||||||||
|
Power
|
AC220V ,50/60HZ, AC380V ,50/60HZ
|
||||||||||||||||
|
Weight (Approx)
|
450
|
600
|
750
|
950
|
1200
|
||||||||||||
Temperature Shock Test Chamber Features
1. Use the aluminum piece to verify the machine load capacity (not plastic load)
2. sensor placement test area rather than the wind crossing, in line with the effectiveness of the experiment
3. The temperature box impact is the test area humidity conforms to the standard requirements
4. can expand the surface temperature of the product to be measured, control the dwell time to shorten the test time
5. can be directly a number of international norms and test conditions
6. Execute low temperature 0 degree impact and save electricity
ASLI main product: climatic chamber, temperature chamber, humidity chamber, walk in chamber, UV aging chamber, thermal shock chamber ,xenon chamber, xenon combined UV aging chamber, PCT chamber, HAST chamber, Vibration chamber, electrodynamic shaker, mechanical shock tester, climatic combined vibration chamber etc.
Reviews
There are no reviews yet.