Gran-sorb all-purpose loose granular cellulose absorbent is clean, safe, effective, highly absorbent, and environmentally responsible.
Gran-sorb granules absorb oils, solvents, lubricants, coolants, water, and most non-aggressive liquids on contact. Because Gran-sorb is made using waste material from select paper mills, it is safe for the environment and can be used on almost all types of spills and clean ups.
Specifications
Material Identification
Chemical Name and Synonyms: Paper
Trade Name and Synonyms: Gran-sorb®
Chemical Family: Cellulose
Composition: Paper fibers, deinked or recycled
Ingredients and Hazards
The materials listed in this Material Safety Data Sheet are classified as non-hazardous in accordance with the definition as set forth in 29 CFR Part 1910.1200(g) (2) (c).
EMERGENCY INFORMATION Emergency Contact 800-424-9300
Emergency contact is to be used Only in the Event of Chemical Emergencies Involving a Spill, Leak, Fire, Exposure, or Accidents Involving Chemicals. AVAILABLE 24 HOURS.
Physical Data
Boiling Point at 1 atm, deg F: N/A Solid
Vapor Pressure at (mm Hg): N/A Solid
Vapor Density (air = 1): N/A Solid
Water Solubility: N/A Solid
Appearance and Odor: Typically gray, with musty odor
Evap. Rate: N/A
Volatiles, % by Volume: <1 Molecular Weight: N/A Bulk Density: 3236 lbs/cft. Fire and Explosion Data Flammability Limits in Air: LOWER N/A, UPPER N/A Extinguishing Media: Water, CO2, Foam Special Fire Fighting Procedures: None Required Unusual Fire and Explosion Hazards: None Autoignition Temp: 220°C TLV: None Established Health Hazard Information Eye Contact: Flush with water or eye drops to remove particles Skin Contact: Wash with soap and water Inhalation: Remove by expiration Ingestion: Induce vomiting Reactivity Data Incompatibility (Materials to Avoid): None Hazardous Decomposition: None Hazardous Polymerization: Will Not Occur Conditions to Avoid: None Known Spill, Leak, and Disposal Procedures Spills, Leaks: (Steps to be taken) Sweep up and contain for disposal Waste Disposal Method: Incinerate or bury in an approved landfill in compliance with all federal, state, and local laws Special Protection Information Respiratory Protection (Specify Type): None Required Ventilation: Use local exhaust to control possible air borne material Other: None Protective Gloves: Gloves recommended for prolonged exposure Eye Protection: Eyeglasses with side shields recommended Special Precautions and Comments Storage and Handling Information: Store in a dry location away from foodstuffs and animal feed Other Precautions: None DOT Class: Cellulose Granular Features Gran-sorb Absorbent is Clean Dust Free Cleans up easily Leaves no stains Non-abrasive Low ash content Wind resistant Gran-sorb Absorbent is Safe Safe for virtually all types of spills Contains NO CRYSTALLINE SILICA No hazardous materials exposure* Fire resistant Industrial absorbents that contain clays (silicates) or diatomaceous earth (amorphous silica) may represent a health hazard* Gran-sorb Absorbent is Effective Soaks up spills fast Retains and holds liquids until clean up is complete Non-scouring for easy use on floors and work surfaces Gran-sorb Absorbent is Highly Absorbent Selectively absorbs oil in water 1:1 absorbency ratio (weight-to-weight) = 30 lbs of Gran-sorb absorbent will absorb 30 lbs. of oil approx. 4 gallons. Gran-sorb Absorbent is Environmentally Responsible and Organically Listed Made from EPA inert certified material paper Contains no dangerous or hazardous materials 100% biodegradable - breaks down naturally into the soil Keeps thousands of tons of waste out of landfills annually Made from 100% post-consumer waste materials Gran-sorb is OMRI listed and considered an organic, all-purpose absorbent. Gran-sorb Absorbent is Readily Available Packaged in 30 lb. sturdy poly bags - 65 bags per pallet Easily packaged and palletized for overseas container shipment Available through our dedicated Gran-sorb distributor network, local dealers and our product partners worldwide Gran-sorb absorbent is the loose granular absorbent with a difference. It delivers the performance you want plus the level of safety and environmental protection you need. SUGGESTED USES FOR GRAN-SORB® INDUSTRIAL ABSORBENT Leaky pumps and compressors Oil storage areas Machining Centers Accident sites Drum Storage areas Transformers, power stations and power plants Fuel Islands Fleets and vehicle maintenance centers Military Bases and Motor pools Machinery all types Any and all types of petroleum and oil spills Machine shops Marine manufacturing plants Heavy Equipment centers Airports and Transportation centers Haz-Mat Teams and vehicles Towing service companies Fire Departments Local Municipal Government Facilities Landfills Chemical Facilities Chemical Spills and clean ups Highway maintenance facilities Paint factories and manufacturing plants Plastic and polymer manufacturing plants absorbs oils, solvents, lubricants and coolants, water and other non-aggressive liquids on contact ideal for smooth floors and indoor areas with heavy traffic manufactured from recycled cellulose the granulate is dust-free, anti-static and can be removed quickly and easily environmentally friendly disposal: by incineration, far less ash residue than with mineral absorbents Reference Specific ReferencesCondition New product Andrew U07/03/2020First Class Product and Service.for sure Industries Safety Nigeria service and product still Maintenance its first class position in Nigerian Safety Industry This product meets your industrial,marine and personal needs.Write your reviewGran-Sorb GranulesQuality12345Delivery12345Communication12345Pricing12345Title for your review*Your review*Required fields* Send or Cancel
Reviews
There are no reviews yet.