By using the HI-3896 Soil test, it is possible to measure pH and the most important elements for plant growth: nitrogen (N), phosphorus (P) and potassium (K).
The chemical composition of soil includes pH and chemical elements. Soil analysis is necessary for better management of fertilisation and to know the residues of fertilisers in relation to the crop, tillage and the most suitable plant choice for soil composition. An analysis can highlight shortages and help the understanding of the causes of an abnormal growth.
Testing the soil during each crop cycle and comparing the results with plant growth can be a useful experiment for subsequent cultivation. Specifications Specifications
Nitrogen
Method: colorimetric
?Range
traces, low, medium, high
?Chemical Method
Ned
?No. of Tests
25
Phosphorus
Method: colorimetric
?Range
traces, low, medium, high
?Chemical Method
ascorbic acid
?No. of Tests
25
pH
Method: colorimetric
?Range
4 to 9 pH (1 pH increments)
?Chemical Method
pH indicator
?No. of Tests
25
Potassium
Method: turbidimetric
?Range
traces, low, medium, high
?Chemical Method
tetraphenyl-borate
?No. of Tests
25
Dimensions
235 x 176 x 117 mm
Weight
710 g
Feefo Reviews
The HI-766C is a general purpose K-type thermocouple penetration probe suitable for taking temperature measurements of semi-solids, meat and rubber.This probe has a 155mm stem length and is suitable for use with any K-Type Thermocouple thermometer.Application semi-solids, meat, rubber Max Temperature 900?C (1650?F) Sensor K-Type Thermocouple Response Time 15 seconds Probe Dimensions L 155 mm x dia 3 mm Probe Material stainless steel Cable Length 1m Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews
The HI-87314 is a combination, portable meter that can read conductivity in four different ranges and resistivity.
For conductivity measurements, a one-point calibration is performed via a trimmer located in the battery compartment. The supplied probe does not require recalibration when switching from one range to another.
The four-ring (stainless steel) probe has a built-in temperature sensor that automatically compensates for temperature changes.
For resistivity measurements, the meter is factory calibrated and, if necessary, calibration can be adjusted. The HI-3316D resistivity probe is easy to clean and requires little maintenance. It also features a built-in temperature sensor to automatically compensate for temperature variations. The temperature coefficient is user-selectable from 2 to 7%.
Ideal for
Water conditioning
Water softening
De-mineralisation
Reverse osmosis
Drinking water applications
Key features
Supplied with two probes
Automatic probe recognition
On-screen operation guide
Automatic Temperature Compensation
Supplied with
HI-76302W conductivity probe and HI-3316D resistivity probe
HI-70030 calibration solution sachet
Calibration screwdriver
Battery
Instructions and hard carrying case
24 month warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Request Information...
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
Request information
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
Request Information
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
Feefo Reviews Related Blogs Conductivity, Resistivity, TDS and Salinity Measurements What is conductivity? Conductivity is a measure of the ability of a substance to conduct an electrical flow through it. In water, many compounds and molecules (such as dissolved salts and inorganic materials) dissociate into constitutive ions.?Ions are small sub-atomic particles and carry with them an electrical charge; either positive (cations) or negative (anions). These particles help condu...5 years ago More Information More Information ColourWhite ParameterConductivity
HI-97700-11 Ammonia LR CAL Check calibration standards for HI-97700The CAL check calibration set includes one sealed ?A? cuvette for zeroing the meter and one ?B? cuvette that is used to validate or calibrate. Each set of standards is produced using reagent grade chemicals in a temperature controlled environment. Each calibration standard comes in a storage container which protects from light and accidental breakage.?
Each set is supplied with Certificate of Analysis containing the following information:
Product code
Lot number
Expiry date
Purchasing chemicals Can I buy chemicals as a private individual?
The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals.
What's the process for buying Chemicals?
Business User - You should have an account with Allschoolabs so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery.
These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110
Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases.
Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded.
Delivery to Home addresses?
Allschoolabs use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address.
Home office license scheme
We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme.
Home office scheme for details click here
Are Allschoolabs chemicals suitable for clinical or other medicinal use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for any other use.
Are Allschoolabs chemicals suitable for food use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for food use. Feefo Reviews More Information More Information ParameterAmmonia
HI-97700C Ammonia LR (0.00-3.00 mg/l) photometer Kit with standardsRange Overview:
The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface.
Features:
Measures Ammonia LR (0.00-3.00mg/l)
Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading.
Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water.
Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions.
Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use.
Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability.
High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error.
Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
GLP data ? recall the last 50 measurements on screen along with date of last calibration.
Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature)
Options:
Many meters are available to purchase separately or as part of a kit containing CAL Check standards.
Warranty
2 year manufacturers warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Feefo Reviews More Information More Information ParameterAmmonia
HI-97701 Free Chlorine (0.00 - 5.00 mg/L) portable photometerRange Overview:
The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface.
Features:
Measures Free Chlorine (0.00-5.00mg/l)
Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading.
Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water.
Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions.
Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use.
Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability.
High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error.
Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
GLP data ? recall the last 50 measurements on screen along with date of last calibration.
Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature)
Options:
Many meters are available to purchase separately or as part of a kit containing CAL Check standards.
Warranty
2 year manufacturers warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Feefo Reviews More Information More Information ParameterChlorine
HI-97701-11 Free Chlorine CAL Check calibration standards for HI-97701
The CAL check calibration set includes one sealed ?A? cuvette for zeroing the meter and one ?B? cuvette that is used to validate or calibrate. Each set of standards is produced using reagent grade chemicals in a temperature controlled environment. Each calibration standard comes in a storage container which protects from light and accidental breakage.?
Each set is supplied with Certificate of Analysis containing the following information:
Product code
Lot number
Expiry date
Purchasing chemicals Can I buy chemicals as a private individual?
The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals.
What's the process for buying Chemicals?
Business User - You should have an account with Allschoolabs so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery.
These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110
Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases.
Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded.
Delivery to Home addresses?
Allschoolabs use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address.
Home office license scheme
We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme.
Home office scheme for details click here
Are Allschoolabs chemicals suitable for clinical or other medicinal use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for any other use.
Are Allschoolabs chemicals suitable for food use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for food use. Feefo Reviews More Information More Information ParameterChlorine
HI-97701 Free Chlorine (0.00 - 5.00 mg/L) photometer kit with standardsRange Overview:
The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface.
Features:
Measures Free Chlorine (0.00-5.00mg/l)
Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading.
Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water.
Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions.
Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use.
Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability.
High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error.
Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
GLP data ? recall the last 50 measurements on screen along with date of last calibration.
Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature)
Options:
Many meters are available to purchase separately or as part of a kit containing CAL Check standards.
Warranty
2 year manufacturers warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Feefo Reviews More Information More Information ParameterChlorine
HI-97702 Copper HR (0.00 to 5.00 mg/l) ppm portable photometerRange Overview:
The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface.
Features:
Measures Copper HR (0.00 to 5.00 mg/l)
Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading.
Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water.
Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions.
Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use.
Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability.
High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error.
Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
GLP data ? recall the last 50 measurements on screen along with date of last calibration.
Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature)
Options:
Many meters are available to purchase separately or as part of a kit containing CAL Check standards.
Warranty
2 year manufacturers warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Feefo Reviews More Information More Information ParameterCopper
HI-97702-11 Copper HR CAL Check calibration standards for HI-97702The CAL check calibration set includes one sealed ?A? cuvette for zeroing the meter and one ?B? cuvette that is used to validate or calibrate. Each set of standards is produced using reagent grade chemicals in a temperature controlled environment. Each calibration standard comes in a storage container which protects from light and accidental breakage.?
Each set is supplied with Certificate of Analysis containing the following information:
Product code
Lot number
Expiry date
Purchasing chemicals Can I buy chemicals as a private individual?
The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals.
What's the process for buying Chemicals?
Business User - You should have an account with Allschoolabs so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery.
These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110
Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases.
Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded.
Delivery to Home addresses?
Allschoolabs use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address.
Home office license scheme
We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme.
Home office scheme for details click here
Are Allschoolabs chemicals suitable for clinical or other medicinal use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for any other use.
Are Allschoolabs chemicals suitable for food use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for food use. Feefo Reviews More Information More Information ParameterCopper
HI-97702C Copper HR (0.00 to 5.00 mg/l) photometer kit with standardsRange Overview:
The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface.
Features:
Measures Copper HR (0.00 to 5.00 mg/l)
Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading.
Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water.
Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions.
Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use.
Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability.
High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error.
Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
GLP data ? recall the last 50 measurements on screen along with date of last calibration.
Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature)
Options:
Many meters are available to purchase separately or as part of a kit containing CAL Check standards.
Warranty
2 year manufacturers warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Feefo Reviews More Information More Information ParameterCopper
HI-97704 Hydrazine (0-400ug/l) portable photometerRange Overview:
The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface.
Features:
Measures Hydrazine (0-400ug/l)
Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading.
Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water.
Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions.
Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use.
Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability.
High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error.
Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples.
GLP data ? recall the last 50 measurements on screen along with date of last calibration.
Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature)
Options:
Many meters are available to purchase separately or as part of a kit containing CAL Check standards.
Warranty
2 year manufacturers warranty
Servicing Servicing Options Available
?
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
?
The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
?
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
?
Request a quote for your servicing requirements today.
Quote Request Feefo Reviews More Information More Information ParameterHydrazine
HI-97704-11 Hydrazine CAL Check calibration standards for HI-97704The CAL check calibration set includes one sealed ?A? cuvette for zeroing the meter and one ?B? cuvette that is used to validate or calibrate. Each set of standards is produced using reagent grade chemicals in a temperature controlled environment. Each calibration standard comes in a storage container which protects from light and accidental breakage.?
Each set is supplied with Certificate of Analysis containing the following information:
Product code
Lot number
Expiry date
Purchasing chemicals Can I buy chemicals as a private individual?
The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals.
What's the process for buying Chemicals?
Business User - You should have an account with Allschoolabs so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery.
These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110
Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases.
Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded.
Delivery to Home addresses?
Allschoolabs use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address.
Home office license scheme
We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme.
Home office scheme for details click here
Are Allschoolabs chemicals suitable for clinical or other medicinal use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for any other use.
Are Allschoolabs chemicals suitable for food use?
Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for food use. Feefo Reviews More Information More Information ParameterHydrazine
RIVAXA 15MG STRIP OF 14 TABLETS ₦7,622.25
RESPICURE LS DROPS 15ML ₦1,599.50
By using the HI-3896 Soil test, it is possible to measure pH and the most important elements for plant growth: nitrogen (N), phosphorus (P) and potassium (K). The chemical composition of soil includes pH and chemical elements. Soil analysis is necessary for better management of fertilisation and to know the residues of fertilisers in relation to the crop, tillage and the most suitable plant choice for soil composition. An analysis can highlight shortages and help the understanding of the causes of an abnormal growth. Testing the soil during each crop cycle and comparing the results with plant growth can be a useful experiment for subsequent cultivation. Specifications Specifications Nitrogen Method: colorimetric ?Range traces, low, medium, high ?Chemical Method Ned ?No. of Tests 25 Phosphorus Method: colorimetric ?Range traces, low, medium, high ?Chemical Method ascorbic acid ?No. of Tests 25 pH Method: colorimetric ?Range 4 to 9 pH (1 pH increments) ?Chemical Method pH indicator ?No. of Tests 25 Potassium Method: turbidimetric ?Range traces, low, medium, high ?Chemical Method tetraphenyl-borate ?No. of Tests 25 Dimensions 235 x 176 x 117 mm Weight 710 g Feefo Reviews
The HI-766C is a general purpose K-type thermocouple penetration probe suitable for taking temperature measurements of semi-solids, meat and rubber.This probe has a 155mm stem length and is suitable for use with any K-Type Thermocouple thermometer.Application semi-solids, meat, rubber Max Temperature 900?C (1650?F) Sensor K-Type Thermocouple Response Time 15 seconds Probe Dimensions L 155 mm x dia 3 mm Probe Material stainless steel Cable Length 1m Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews
The HI-87314 is a combination, portable meter that can read conductivity in four different ranges and resistivity. For conductivity measurements, a one-point calibration is performed via a trimmer located in the battery compartment. The supplied probe does not require recalibration when switching from one range to another. The four-ring (stainless steel) probe has a built-in temperature sensor that automatically compensates for temperature changes. For resistivity measurements, the meter is factory calibrated and, if necessary, calibration can be adjusted. The HI-3316D resistivity probe is easy to clean and requires little maintenance. It also features a built-in temperature sensor to automatically compensate for temperature variations. The temperature coefficient is user-selectable from 2 to 7%. Ideal for Water conditioning Water softening De-mineralisation Reverse osmosis Drinking water applications Key features Supplied with two probes Automatic probe recognition On-screen operation guide Automatic Temperature Compensation Supplied with HI-76302W conductivity probe and HI-3316D resistivity probe HI-70030 calibration solution sachet Calibration screwdriver Battery Instructions and hard carrying case 24 month warranty Servicing Servicing Options Available ? Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate. ? The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration. Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available. ? A typical preventative maintenance service includes the following: Inspection and testing of the unit Dismantling, cleaning and inspection of the key parts Correction of minor defects including adjustments if necessary Reassembly and testing Take post adjustment / cleaning readings Supply of calibration certificate Return of the item to you (back to base services) ? Request a quote for your servicing requirements today. Quote Request Request Information... For more information on this product please click the Request information button below and we will get back to you as soon as we can. Request information Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget. Your product or service requirements Performance criteria Budget constraints Site access Project timeframes Services available Environmental factors Please click the Request Consultation button below and we will get back to you as soon as we can. Request Information The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 Feefo Reviews Related Blogs Conductivity, Resistivity, TDS and Salinity Measurements What is conductivity? Conductivity is a measure of the ability of a substance to conduct an electrical flow through it. In water, many compounds and molecules (such as dissolved salts and inorganic materials) dissociate into constitutive ions.?Ions are small sub-atomic particles and carry with them an electrical charge; either positive (cations) or negative (anions). These particles help condu...5 years ago More Information More Information ColourWhite ParameterConductivity
HI-97700-11 Ammonia LR CAL Check calibration standards for HI-97700The CAL check calibration set includes one sealed ?A? cuvette for zeroing the meter and one ?B? cuvette that is used to validate or calibrate. Each set of standards is produced using reagent grade chemicals in a temperature controlled environment. Each calibration standard comes in a storage container which protects from light and accidental breakage.? Each set is supplied with Certificate of Analysis containing the following information: Product code Lot number Expiry date Purchasing chemicals Can I buy chemicals as a private individual? The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals. What's the process for buying Chemicals? Business User - You should have an account with Allschoolabs so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery. These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110 Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases. Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded. Delivery to Home addresses? Allschoolabs use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address. Home office license scheme We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme. Home office scheme for details click here Are Allschoolabs chemicals suitable for clinical or other medicinal use? Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for any other use. Are Allschoolabs chemicals suitable for food use? Allschoolabs supply chemicals for laboratory use only, they are not suitable or recommended for food use. Feefo Reviews More Information More Information ParameterAmmonia
HI-97700C Ammonia LR (0.00-3.00 mg/l) photometer Kit with standardsRange Overview: The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface. Features: Measures Ammonia LR (0.00-3.00mg/l) Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading. Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water. Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions. Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use. Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability. High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error. Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples. GLP data ? recall the last 50 measurements on screen along with date of last calibration. Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature) Options: Many meters are available to purchase separately or as part of a kit containing CAL Check standards. Warranty 2 year manufacturers warranty Servicing Servicing Options Available ? Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate. ? The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration. Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available. ? A typical preventative maintenance service includes the following: Inspection and testing of the unit Dismantling, cleaning and inspection of the key parts Correction of minor defects including adjustments if necessary Reassembly and testing Take post adjustment / cleaning readings Supply of calibration certificate Return of the item to you (back to base services) ? Request a quote for your servicing requirements today. Quote Request Feefo Reviews More Information More Information ParameterAmmonia
HI-97701 Free Chlorine (0.00 - 5.00 mg/L) portable photometerRange Overview: The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface. Features: Measures Free Chlorine (0.00-5.00mg/l) Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading. Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water. Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions. Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use. Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability. High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error. Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples. GLP data ? recall the last 50 measurements on screen along with date of last calibration. Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature) Options: Many meters are available to purchase separately or as part of a kit containing CAL Check standards. Warranty 2 year manufacturers warranty Servicing Servicing Options Available ? Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate. ? The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration. Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available. ? A typical preventative maintenance service includes the following: Inspection and testing of the unit Dismantling, cleaning and inspection of the key parts Correction of minor defects including adjustments if necessary Reassembly and testing Take post adjustment / cleaning readings Supply of calibration certificate Return of the item to you (back to base services) ? Request a quote for your servicing requirements today. Quote Request Feefo Reviews More Information More Information ParameterChlorine
HI-97701 Free Chlorine (0.00 - 5.00 mg/L) photometer kit with standardsRange Overview: The Hanna Instruments HI-977 range is comprised of a comprehensive selection of advanced waterproof portable photometers. Most meters in the range have the ability to measure single testing parameters with a few multi-parameter meters completing the selection. Each photometer is designed with an innovative optical system that offers superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. Meters are simple and straightforward to use, with a large LCD display and intuitive interface. Features: Measures Free Chlorine (0.00-5.00mg/l) Easy to use. Each photometer is very intuitive and even has a tutorial mode for step-by-step instructions. Other user friendly features include error message displays when somethings wrong, built in reaction timer from reagent addition to when measurement is to be taken and display of the unit of measure along with the reading. Robust and waterproof. This meter will float if dropped in water and is IP67 rated. The internal optics are sealed from outside dust, dirt, and water. Large backlit LCD display (71 x 37mm) for ease of viewing in almost all light conditions. Portable sized- fits comfortably in your hand for field use but will also fit on a table for benchtop use. Utilises a high efficiency LED light source which offers superior performance compared to tungsten lamps. LEDs have a much higher luminous efficiency, providing more light while using less power. They also produce little heat, which could otherwise affect electronic stability. High quality filters ensure greater wavelength accuracy and allow a brighter, stronger signal to be received. The end result is higher measurement stability and less wavelength error. Large cuvette size with 25mm path length. The relatively long path length of the sample cuvette allows the light to pass through more of the sample solution, ensuring accurate measurements even in low absorbance samples. GLP data ? recall the last 50 measurements on screen along with date of last calibration. Cal check functionality - validate the performance of the instrument at any time and apply a user calibration using CAL Check cuvettes made with NIST traceable standards. (Please note, CAL check standards are only included in the kit options. Otherwise they must be purchased separately to take advantage of this feature) Options: Many meters are available to purchase separately or as part of a kit containing CAL Check standards. Warranty 2 year manufacturers warranty Servicing Servicing Options Available ? Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate. ? The Allschoolabs Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration. Allschoolabs can offer yearly service contracts which include two main types of preventative maintenance/calibration services ? the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available. ? A typical preventative maintenance service includes the following: Inspection and testing of the unit Dismantling, cleaning and inspection of the key parts Correction of minor defects including adjustments if necessary Reassembly and testing Take post adjustment / cleaning readings Supply of calibration certificate Return of the item to you (back to base services) ? Request a quote for your servicing requirements today. Quote Request Feefo Reviews More Information More Information ParameterChlorine