Key FeaturesPOSITIVE:* Two lines appear. One colored line should be in the control line region (C) and another apparent colored line should be in the test line region (T). *NOTE: The intensity of the color in the test line region (T) will vary depending on the concentration of antigen, vis., HRP-II present in the specimen. Therefore, any shade of color in the test line region (T) should be considered positive.?
NEGATIVE: One colored line appears in the control line region (C). No line appears in the test line region (T). INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
?QUALITY CONTROL Internal procedural controls are included in the test. A colored line appearing in the control region (C) is an internal valid procedural control. It confirms sufficient specimen volume and correct procedural technique. Control standards are not supplied with this kit; however, it is recommended that positive and negative controls be tested as a good laboratory practice to confirm the test procedure and to verify proper test performance.?
SpecificationsSKU: GI816IP2D5VXKNAFAMZProduct Line: Etlinas MallProduction Country: ChinaSize (L x W x H cm): 10x8x6Weight (kg): 0.1